Register, edit, or delete a TU offset profile.
Set the required adjustments to suit the trim type selected in the trimmer profile.
Setting item | Description |
---|---|
[Four Edge Trim Mode] | Adjusts the trim position and crease position to cut all sides of the paper. For details about [Four Edge Trim Mode] settings, refer to [Four Edge Trim Mode] of [Adjustment]. |
[Multiple Cutting Mode] | Adjusts the trim position and crease position to divide the paper into 2 sheets. For details about [Multiple Cutting Mode] settings, refer to [Multiple Cutting Mode] of [Adjustment]. |
[Card Cutting Mode] | Adjusts the trim position and crease position to cut the paper to the business card size. For details about [Card Cutting Mode] settings, refer to [Card Cutting Mode] of [Adjustment]. |
[1e1-1e3/1e1-3e3 Mode] | Arbitrarily adjusts the trim position, crease position, and perforation position. For details about [1e1-1e3/1e1-3e3 Mode] settings, refer to [1x1-1x3/1x1-3x3 Mode] of [Adjustment]. |
[Paper Skew Adjustment] | Adjust a skew in the paper feed direction. For details about [Paper Skew Adjustment] settings, refer to [Paper Skew Adjustment] of [Adjustment]. |
[CD Alignment Adjustment] | Adjust the alignment amount in the crosswise direction of Trimmer Unit TU-510. For details about [CD Alignment Adjustment] settings, refer to [CD Alignment Adjustment] of [Adjustment]. |
[Banner Skew Adjustment] | Adjust a skew amount of a steering roller. For details about [Banner Skew Adjustment] settings, refer to [Banner Skew Adjustment] of [Adjustment]. |
Set each item.
The registration number of a TU offset profile is displayed in the entry field.
Up to 50 single-byte characters (25 double-byte characters) can be entered.
For details about how to enter characters, refer to Entering Text.
The TU offset profile is registered.
Set each item.
The TU offset profile is updated.