[Front]
Overview
Adjust the magnification and position of the image to print on the front side.
Reference
- For details about [Chart Adjustment], refer to [Chart Adjustment] ([Front]/[Back]).
Setting Procedure
Adjust the magnification and position of the image to print on the front side.
Prepare a test chart to check a misalignment between the front and back sides before adjustment. For convenient use, set a reference point for measuring the zoom ratio or position on a test chart.
1
After outputting an adjustment chart, confirm the zoom ratio and any misalignment.
If there is misalignment, proceed to step 2.
2
Press [Vertical].
3
Use the on-screen keypad or the Keypad of the Control panel to enter the numeric value.
Use [+ / -] to select the positive or negative value.
Print image size adjustment: (-) Reduce (+) Enlarge
Adjustment range: [-1.00~+1.00]
4
Press [Horizontal].
5
Use the on-screen keypad or the Keypad of the Control panel to enter the numeric value.
Use [+ / -] to select the positive or negative value.
Print image size adjustment: (-) Reduce (+) Enlarge
Adjustment range: [-1.00~+1.00]
6
Press [Up/Down].
7
Use the on-screen keypad or the Keypad of the Control panel to enter the numeric value.
Use [+ / -] to select the positive or negative value.
Print image size adjustment: (-) Move down (+) Move up
Adjustment range: [-10.0~+10.0]
8
Press [Right/Left].
9
Use the on-screen keypad or the Keypad of the Control panel to enter the numeric value.
Use [+ / -] to select the positive or negative value.
Print image size adjustment: (-) Move to the left (+) Move to the right
Adjustment range: [-3.0~+3.0]
10
Output a chart of the front side.
Compare the output chart with a chart for adjustments. Check that the zoom ratio and misalignment on the front side is improved.
Repeat steps 2 to 9 until the desired result is obtained.
in the upper-right of a page, it turns into 
and is registered as a bookmark.