Adjust the magnification and position of the image to print on the back side.
First adjust [Zoom] and [Image Shift] for the front side, and adjust the back side to suit the front side.
It is useful when making fine adjustments after conducting Both Sides Adjust.
Adjust the magnification and position of the image to print on the back side.
Prepare a test chart to check a misalignment between the front and back sides before adjustment. For convenient use, set a reference point for measuring the zoom ratio or position on a test chart.
If there is misalignment, proceed to step 2.
Use [+ / -] to select the positive or negative value.
Print image size adjustment: (-) Reduce (+) Enlarge
Adjustment range: [-1.00~+1.00]
Use [+ / -] to select the positive or negative value.
Print image size adjustment: (-) Reduce (+) Enlarge
Adjustment range: [-0.80~+0.80]
Use [+ / -] to select the positive or negative value.
Print image size adjustment: (-) Move down (+) Move up
Adjustment range: [-10.0~+10.0]
Use [+ / -] to select the positive or negative value.
Print image size adjustment: (-) Move to the left (+) Move to the right
Adjustment range: [-3.0~+3.0]
Compare the output chart with a chart for adjustments. Check that the zoom ratio and misalignment on the back side are improved.
Repeat steps 2 to 9 until the desired result is obtained.