[Paper Type]

Select the desired paper type from the list.

Paper is classified by surface processing or texture. Set the appropriate paper type for your requirements.

[Profile Name]

Displays the name of the paper profile.

For details about [Profile Name] settings, refer to [Profile Name] of [Reg./Del.PaperSet.].

[Paper Size]

Set the standard size or custom size for paper or paper profile, or the paper size for tab paper.

[Weight]

Set the weight for paper or paper profile.

Setting an incorrect weight may cause paper jams or double feeding.

[Colored Paper]

Set the color for paper or paper profile.

Setting the paper color is useful to prevent an incorrect paper tray from being selected when making copies or using Auto Tray Switch.

[Punch]

Set this function when using the punched paper.

[Both Sides Adj.]

Adjust any misalignment of printing positions on the front and back sides that occurs during 2-sided printing.

When you change the paper to load into a paper tray, always perform [Both Sides Adj.].

[RU Curl Adj.]

Pass paper through the curved route for curl correction in order to reduce paper curling.

[Paper Separation]

Change the air blow conditions, and air will blow on the paper loaded in the paper tray.

This function separates the loaded paper sheets to enable smooth paper feeding.

[TU OffsetProfile]

Set the TU offset profile to the paper or paper profile.

You can register the advanced settings (TU offset profile) of the processing performed in Trimmer Unit TU-510.

[Expert Adj.]

Set the advanced adjustment items such as the transfer, separation, or fusing process.

Adjusting the [Expert Adj.] items allows you to deal with various situations or finishing conditions.

[Color Density]

Set the sensor adjustment value used for output density adjustment.

By utilizing the registered [Registered Adj. Data], it is possible to make corrections that take into account different paper characteristics such as plain paper and coated paper.

[Reset]

Returns all the settings to the default.

[Search]

Moves to the [Recall] screen.

[SearchCondition] allows you to narrow a search item to the current setting and search for a registered paper profile.