Adjustment Flow for When Using New Types of Paper
Overview
Perform adjustment at the following timings.
When using a new type of paper
When you cannot reproduce colors even after performing the Daily Adjustment Flow (High Precision)
If Not Using RU Option (Relay Unit RU-518m)
Step 1
Automatically adjust the color reproducibility of all of the output paper.
Step 2
[Density Balance Auto. Adj.]
Perform [Density Balance Adjustment] (With MYIRO-1) or [Density Balance Auto. Adjustment] (When Mounted With Intelligent Quality Care Unit IQ-501), followed by automatic density balance adjustment.
Step 3
[Controller Calibration] (What Is [Calibration]?)
Correct the constantly changing color reproducibility.
Step 4
[Color Balance Adjustment]
Execute Exact Color or G7 Calibration (About Advanced [Controller Calibration]) to improve color balance reproducibility.
If Using RU Option (Relay Unit RU-518m)
Step 1
Automatically adjust the color reproducibility of all of the output paper.
Step 2
[Density Balance Auto. Adj.]
Perform [Density Balance Adjustment] (With MYIRO-1) or [Density Balance Auto. Adjustment] (When Mounted With Intelligent Quality Care Unit IQ-501), followed by automatic density balance adjustment.
Step 4
[Color Balance Adjustment]
Execute Exact Color or G7 Calibration (About Advanced [Controller Calibration]) to improve color balance reproducibility.
in the upper-right of a page, it turns into 
and is registered as a bookmark.