Adjusting Booklet Finishing

Adjust the finish by adjusting the position and strength of folds, and the position of staples.

Adjust the half fold position and correct any small deviations on the cover side.

Using [Stapler]

Using [Multi Folder]

Using SaddleStitcher SD-506

Using Saddle Stitcher SD-513

Adjust the spacing (pitch) of the staples.

Using SaddleStitcher SD-506

Using Saddle Stitcher SD-513

Adjust for any misalignment between the Fold and Staple staple positions and the position of the paper half fold.

Using SaddleStitcher SD-506

Using Saddle Stitcher SD-513

You can adjust the amount of fore-edge trimming.

Using SaddleStitcher SD-506

Using Saddle Stitcher SD-513

You can adjust the amount of 2-side slitting using Saddle Stitcher SD-513.

Adjust the strength when forming a stapled and folded booklet spine.

Using Saddle Stitcher SD-513

Using [Perfect Binder]

You can move the crease position in half-folds when using the Saddle Stitcher SD-513. Adjust the distance from the cover lead edge of the output paper's top face to the crease.