[Store Setting]
Overview
Set the destination to store the job that scanned the original.
This function allows you to combine Output with Store or set the file name.
Tips
- The file name can be omitted. If the file name is omitted, a 4-digit number is automatically assigned as the file name.
Setting Items
Setting item | Description |
|---|---|
[Print] | Prints data scanned from the ADF or Original glass. |
[Hold + Print] | Holds data scanned from the ADF or Original glass on this system, and simultaneously prints it. For details, refer to [STORE]. |
[Hold] | Holds data scanned from the ADF or Original glass on this system. For details, refer to [STORE]. |
[HDD Store + Print] | Stores data scanned from the ADF or Original glass in the HDD, and simultaneously prints it. For details, refer to [STORE]. |
[HDD Store] | Stores data scanned from the ADF or Original glass on the HDD. For details, refer to [STORE]. |
[File Name] | Enter [File Name]. Up to 127 single-byte characters (63 double-byte characters) can be entered. The same name can be entered as necessary. For details, refer to [STORE]. |
Setting Procedure (Job Storage Setting)
1
Press the output method and storage destination keys.
Pressing [HDD Store + Print] or [HDD Store] displays the [Root Directory] screen. Set the storage location, and press [OK].
2
Press [File Name].
The file name entry screen opens.
3
Enter the file name, and press [OK].
If the file name is omitted, a 4-digit number is automatically assigned as the file name.
4
Press [OK].
The storage destination is set.
in the upper-right of a page, it turns into 
and is registered as a bookmark.