[Staple]

• Finisher FS-532

[Punch]

• FoldingUnit FD-503

• Finisher FS-532 + Punch Unit PK-525

[Fold&Staple]

• SaddleStitcher SD-506

• Saddle Stitcher SD-513

• Finisher FS-532 + Saddle Stitcher SD-510

[Multi Half]

• SaddleStitcher SD-506

• Saddle Stitcher SD-513

• Finisher FS-532 + Saddle Stitcher SD-510

[Crease]

Saddle Stitcher SD-513 + Creaser Unit CR-101

[Multi 3-Fold]

• SaddleStitcher SD-506

• Saddle Stitcher SD-513

• Finisher FS-532 + Saddle Stitcher SD-510

[Fold]

FoldingUnit FD-503

[Perfect Bind]

Perfect Binder PB-503

[2-Side Slit]

Saddle Stitcher SD-513 + Trimmer Unit TU-503

[Trim]

Trimmer Unit TU-510

[Pile Setting]

Large Capacity Stacker LS-507

[Offset Sort]

• Large Capacity Stacker LS-507

• Finisher FS-532

• Output Tray OT-512

• Output Tray OT-511

[Sort]

[Offset Group]

[Group]

[Staple]

Sets the details of the Staple function.

[Punch]

Sets the details of the Punch function.

[Fold&Staple]

Sets the details of the Fold & Staple function.

When the finisher is only mounted, the Fold & Staple function is enabled by pressing this key.

[Multi Half]

Sets the details of the Multi Half Fold function.

[Crease]

Sets the details of the Crease function.

[Multi 3-Fold]

Sets the details of the Multi Tri-Fold function.

[Fold]

Sets the details of the Fold function.

[Perfect Bind]

Sets the details of the Perfect Bind function that covers with cover paper for bookbinding.

[2-Side Slit]

Sets the details of the 2-Side Slit function that slits both edges of the paper.

[Trim]

Sets paper trimming functions such as Four Edge Trim for trimming around paper, Multiple Cutting for cutting paper to 2 sheets, and Card Cutting for cutting paper to the card size.

[Pile Setting]

Configure the setting that forbids the next printout from being piled up in the stacker when successively printing multiple jobs.

[Offset Sort]

Sets the details of the Offset Sort function that outputs individually for each set.

[Sort]

Continuously outputs without sorting for each set.

The specified number of sets of copies arranged in the same page order as the original are output for each set.

[Offset Group]

Sets the details of the Offset Group function that outputs each original individually.

[Group]

Resets [Offset Group], and outputs continuously.

This function prints the specified number of each page of the original, and outputs in the original order.