Repeatedly print a single original on a single sheet.
This function provides two methods: "Auto Repeat" to automatically repeat an original copy as many times as possible, and "Fixed Repeat" to set based on the number of repetitions. For details about each function, refer to the following sections.
Repeatedly copies the scanned original on paper as many times as possible. The original size is set manually or detected automatically. Load the original on the Original glass.
Setting options | Description |
---|---|
[Image Size Manual Setting] | Manually sets the image size of the original. When repeatedly copying some but not all images in the original, specify the image range. |
[Detect] | Automatically detects the original size. |
Repeatedly copies original images in the range determined by the print paper size and number of repetitions.
Image loss may occur depending on the image position on the original, paper size, or paper orientation.
Original positioning | Setting options | Description |
---|---|---|
[2 Repeat] | Repeats a part of the original image twice. This item can also be set to include the direction in [2 Repeat in Designated Order]. | |
[4 Repeat] | Repeats a part of the original image 4 times. | |
[8 Repeat] | Repeats a part of the original image 8 times. |
The range repeated by Fixed Repeat is determined based on the top left of the ADF. The repeated range varies depending on the orientation of the original and the orientation of the print paper, as shown below.
With the original placed in landscape orientation:
[2 Repeat] | [4 Repeat] | [8 Repeat] | |||
---|---|---|---|---|---|
Select landscape paper. | Select portrait paper. | Select landscape paper. | Select portrait paper. | Select landscape paper. | Select portrait paper. |
With the original placed in portrait orientation:
[2 Repeat] | [4 Repeat] | [8 Repeat] | |||
---|---|---|---|---|---|
Select landscape paper. | Select portrait paper. | Select landscape paper. | Select portrait paper. | Select landscape paper. | Select portrait paper. |
[2 Repeat in Designated Order] is a function that reverses one of the repeated images, and repeats it twice. You can select the reverse direction so that the direction matches when a completed copy is trimmed.
Setting options | Original | Description |
---|---|---|
[R/Down-Reverse] | With the original placed in portrait orientation: | |
With the original placed in landscape orientation: | ||
[L/Up-Reverse] | With the original placed in portrait orientation: | |
With the original placed in landscape orientation: |
Screen access
Touch panel - [COPY] - [Application] - [Image Repeat]
Setting item | Description |
---|---|
Repeatedly copy the manually specified range on paper as many times as possible. When repeating the entire original, set the original size. When repeatedly copying a portion of the images in the original, manually set the range of the images. | |
Automatically detect the original size, and copy the scanned data to paper repeatedly as many times as possible (Auto Repeat). | |
Repeatedly copy original images in the range determined by the print paper size and number of repetitions (Fixed Repeat). Set the number of repetitions as well as the position to rotate an image. To reverse an image, select the reverse direction so that the finished copies are trimmed in the same direction. | |
[Function OFF] | Turns the function off while maintaining the set information. |