Connecting to the IPX Environment

[ON]/[OFF]

Select whether to use IPX.

[OFF] is specified by default.

[Ethernet Frame Type]

Select the Ethernet frame type according to your environment.

[Auto Detect] is specified by default.

[ON]/[OFF]

‏Select whether to enable NetWare printing.

[OFF] is specified by default.

[NetWare Print Mode]

Select an operation mode of the print server according to your environment.

[PServer] is specified by default.

[PServer]

Tap [PServer] to configure settings for using this machine as PServer.

• [Print Server Name]: Enter the print server name (using up to 63 characters).

• [Print Server Password]: If necessary, enter a print server password (using up to 63 characters).

• [Polling Interval]: Specify a job inquiry interval.[1] is specified by default.

• [NDS/Bindery Setting]: Select [NDS] or [NDS & Bindery].[NDS] is specified by default.

• [File Server Name]: Enter the priority file server name to be used in the Bindery emulation mode (using up to 47 characters).

• [NDS Context Name]: Enter the context name of the NDS to be connected via the print server (using up to 191 characters).

• [NDS Tree Name]: Enter the tree name of the NDS to be connected via the print server (using up to 63 characters).

[Nprinter/Rprinter]

Tap [Nprinter/Rprinter] to configure settings for using this machine as Nprinter or Rprinter.

• [Print Server Name]: Enter the print server name (using up to 63 characters).

• [Printer Number]: Enter the printer number.

[Status]

Allows you to check the server name, queue name, or queue status.