- Home
- Menu
× Menu Useful Software If you have a problem…
- FAQ
- Troubleshooting
Menu
Utility/Counter
- Overview of Utility/Counter
- Scan Address Register
- User Setting
- User Setting: System Setting
- Language Setting
- Unit Setting
- Paper Tray Setting
- Reset Setting
- Default Screen Setting
- Set Zoom Ratio Setting
- Power Save Setting
- Date/Time Setting
- Operation/Info. Sound Setting
- Key Response Time
- Shortcut Key Register
- Service Port Device Setting
- Mouse Setting
- User Setting: Initial Setting
- User Setting: Common Setting
- User Setting: Copy Setting
- User Setting: Scan Setting
- User Setting: Printer Setting
- User Setting: Image Quality Setting
- User Setting: Change Password
- Administrator Setting
- Administrator Setting: System Setting
- Power Save Setting
- Date/Time Setting
- Weekly Timer Setting
- Restrict User Access
- Expert Adjustment: Auto Background Dens. Adj.
- Expert Adjustment: Erase Correction
- Expert Adjustment: Printer Adjustment
- Expert Adjustment: Finisher Adjustment
- Expert Adjustment: Scan Adjustment
- Expert Adjustment: Process Adjustment
- Expert Adjustment: Quality Adjustment
- Expert Adjustment: Execute Adjust Operation
- Expert Adjustment: ADF Adjustment
- ADF Original Stop Pos. Adj.
- ADF Orig. Stop Pos. Auto
- FD-Mag. Adjustment
- FD-Mag. Auto Adjustment
- Line Detection(Front Side)
- Line Detection(Back Side)
- Home Read Position Adj(Back)
- FD-Mag. Adjustment(Back)
- FD-Mag. Auto Adj. (Back)
- Main Scan Dir. Zoom(Back)
- Main ScanDir. Zoom Auto(Back)
- Original Tray Pre-rise Set.
- Expert Adjustment: Corner Staple(Back) Angle
- List/Counter
- Size Setting
- Annotation Setting
- Perfect Binder Setting
- Operation Screen Customize
- Administrator Setting: Administrator Registration
- Administrator Setting: Scan Address Register
- Administrator Setting: User Auth./Account Track
- User Authentication and Account Track
- General Settings
- User Auth. Settings
- Account Track
- Print without Authentication
- Auth. Device Settings
- External Server Settings
- User/Account Common Setting
- Administrator Setting: Network Setting
- NIC Settings
- Displaying the NIC Settings screen
- TCP/IP Settings
- HTTP Server Settings
- FTP Settings
- SMB Settings
- LDAP Settings
- E-Mail Settings
- SNMP Settings
- Bonjour Setting
- TCP Socket Settings
- WebDAV Settings
- DPWS Settings
- SSDP Settings
- Detail Settings
- IEEE802.1x Authentication Settings
- IWS Settings
- Remote Panel Settings
- JSP Setting
- Hot Folder Setting
- AccurioPro Print Manager
- E-mail Initial Setting
- http Communication Setting
- Quick Security
- NIC Settings
- Administrator Setting: Common Setting
- Administrator Setting: Copy Setting
- Administrator Setting: Scan Setting
- Administrator Setting: System Connection
- Administrator Setting: Security Setting
- Administrator Setting: OpenAPI Auth. Management
- Administrator Setting: Firmware Version
- Administrator Setting: ISW
- Administrator Setting: Security Setting (UK-301)
- Administrator Setting: Controller Administrator Setting
- Touch Panel Adjustment
- Quick Security Setting
http Communication Setting
Configure the http communication settings.
Tips
Configure this setting to use the CS Remote Care. For details, contact your service representative.
Follow the procedure on Displaying the Administrator Setting Menu Screen to display the Administrator Setting Menu screen.
Press Network Setting on the Administrator Setting Menu screen, and then press http Communication Setting.
The http Communication Setting screen is displayed.
Make a setting for each item.
supplementary explanationPress an item key to display the setting screen for each. When an entry screen or screen with touch panel keypad is displayed, make an entry as desired, then press OK to complete it. For more information about how to enter characters, refer to Inputting Characters.
Press OK to complete the setting.
supplementary explanationTo cancel the change, press Cancel.
In either case, the screen returns to the Network Setting Menu screen.