Erase Operation Setting

Set Erase Mode and Original Density when No Image Area Erase is selected in Application. The default setting is Auto.

Tips
  • In the auto mode, erasing may not work well depending on the original. In such a case, manually select the Erase Mode and Original Density.

  1. Follow the procedure on Displaying the Administrator Setting Menu Screen to display the Administrator Setting Menu screen.

  2. Press System Setting on the Administrator Setting Menu screen, and then press Expert Adjustment, Erase Correction, and Erase Operation Setting in sequence.

    The Non-Image Area Erase Operation Setting screen is displayed.

  3. Select the desired button for each item. Press Auto to set them to function automatically.

  4. Press OK to complete the setting.

    • supplementary explanationTo cancel the change, press Cancel.

    In either case, the screen returns to the Erase Correction Menu screen.