Paper trays | Weight |
---|---|
Paper Feed Unit PF-707m | 52 g/m2 to 400 g/m2*1 / 14 lb Bond to 106 lb Bond Each of the four types of coated paper: 81 g/m2 to 400 g/m2*1 / 22 lb Bond to 106 lb Bond*1 |
Paper Feed Unit PF-711 | 52 g/m2 to 400 g/m2*1 / 14 lb Bond to 106 lb Bond Each of the four types of coated paper: 81 g/m2 to 400 g/m2*1 / 22 lb Bond to 106 lb Bond*1 |
Cover tray of Perfect Binder PB-503 | 81 g/m2 to 216 g/m2 / 22 lb Bond to 57 lb Bond |
Post inserter (equipped in Folding Unit FD-503 as standard) | 50 g/m2 to 300 g/m2*2 / 13 lb Bond to 81 lb Bond *2 |
Post Inserter PI-502 (equipped in Finisher FS-532 as option) | 50 g/m2 to 300 g/m2*3 / 13 lb Bond to 81 lb Bond *3 |
*1: 351 g/m2 to 400 g/m2 / 94 lb Bond to 106 lb Bond can only be loaded into the lower tray of the 1st unit.
The following paper sizes are available.
Standard: SRA3 short edge feed, A3 short edge feed, 1319 short edge feed, 1218 short edge feed, 1117 short edge feed
Custom: Widthwise 279.4 mm to 330.2 mm, Lengthwise 420 mm to 487.7 mm / Widthwise 11" to 13", Lengthwise 16.53" to 19.2"
*2: When the machine is mounted with Perfect Binder PB-503, the weight information for the upper tray / lower tray of Post Inserter mounted on Folding Unit FD-503 should be set within the range of 81 g/m2 to 216 g/m2 or 22 lb Bond to 57 lb Bond in the paper setting, in order to comply with the specifications for perfect binding cover paper. For the machine without Perfect Binder PB-503 mounted, the weight setting in the paper setting is not required.
*3: The weight setting in the paper setting is not required for the upper tray / lower tray of Post Inserter PI-502.
The setting or registration/deletion of paper weight for each paper tray is available in the paper setting to be made from the COPY or MACHINE screen. For details, refer to Setting Paper in a Paper Tray.
Be sure to use paper only of the weight specified for the tray. Otherwise, print quality may be deteriorated or machine trouble may occur.
For details about the paper setting to register paper conditions for the paper to be used, refer to [Paper Setting]: [Paper Profile Setting].