An original in the following conditions cannot be loaded on the ADF. Use the original glass when the original is not suitable for use with the ADF because the size is incompatible or in generally poor condition.
Curled, wrinkled, or folded | Paste-ups or cutouts | Book |
OHP transparencies, art paper, or cellophane paper | Double-folded, paper with many holes or staples | Thick paper that is hard to bend or thin paper such as letter paper for air mail |
Detectable original sizes:
Metric Table1:
A3 short edge feed, B4 short edge feed*1, A4 short edge feed/long edge feed, B5 short edge feed/long edge feed*1, A5 short edge feed, 8K short edge feed, 16K short edge feed/long edge feed
Metric Table2:
A3 short edge feed, B4 short edge feed, A4 short edge feed/long edge feed, B5 short edge feed/long edge feed*1, A5 short edge feed, 11 17 short edge feed*2, 8.5 14 short edge feed*2*3, 8.5 11 short edge feed/long edge feed*2, 5.5 8.5 short edge feed, 8K short edge feed, 16K short edge feed/long edge feed, 8 13 short edge feed*2*3
Inch Table1:
11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed/long edge feed, 5.5 8.5 short edge feed
Inch Table2:
A3 short edge feed*2, B4 short edge feed*1*2, A4 short edge feed/long edge feed*2, B5 short edge feed/long edge feed*1*2, A5 short edge feed*2, 11 17 short edge feed, 8.5 14 short edge feed*3, 8.5 11 short edge feed/long edge feed, 5.5 8.5 short edge feed, 8 13 short edge feed*2*3
*1: Detects B series of JIS standard sizes. B series of ISO standard sizes cannot be detected.
*2: Can be detected when Table2 is specified in Administrator Setting in the Utility menu - System Setting - Size Setting - Detect Orig. Size on Glass.
*3: Select either 8.5 14 short edge feed or 8 x 13 short edge feed in Administrator Setting in the Utility menu - System Setting - Size Setting - ADF/Orig. Glass Priority.
View | Warning and caution regarding work |
---|---|
Caution: Injury | |
The original glass may be broken and you may be injured. | |
Do not place too heavy originals. Do not press thick originals hard. |
Open the ADF.
Position the original FACE DOWN to align its corner with the left rear corner.
Set the original in the same direction as that of the original direction icon displayed on the COPY screen.
supplementary explanationSet originals in the same direction as that of the original set direction icon on the screen; otherwise the copy result may not be satisfactory. Especially when using 2-sided mode, Staple, Fold & Staple, Multi Half-Fold or Booklet, pay special attention for direction of the original. For details, refer to [Direction]: Setting Direction of Original.
supplementary explanationWith No Image Area Erase selected in the Application setting, the ADF should be kept open while scanning the original.
Gently close the ADF to prevent the original from shifting on the glass.