Machine Specifications
Name | ineo+ 6100/ineo+ 6085 |
Type | Console type |
Color correspondence | Full Color |
Printing process | Quad-drum tandem laser electrostatographic process |
Photoconductor | OPC |
Developing system | Dry, dual-component reverse magnetic brush developing |
Transfer method | Belt-type intermediate transfer/secondary transfer |
Fusing method | Belt/Roller |
Printing resolution: | Main scan: 3,600 dpi (The image data resolution is 1,200 dpi.) Sub scan: 1,200 dpi |
Gradation/Color | 256 gradations (8-bit)/16.7 million colors |
Paper weight | Plain, Fine, Color Specific: 52 g/m2 to 400 g/m2 / 14 lb Bond to 106 lb Bond Coated-GL, Coated-ML, Coated-GO, and Coated-MO: 81 g/m2 to 400 g/m2 / 22 lb Bond to 106 lb Bond * 351 g/m2 to 400 g/m2 / 94 lb Bond to 106 lb Bond has limited paper types. |
Feedable paper size | Standard: SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed/long edge feed, A4 short edge feed/long edge feed, B5 short edge feed/long edge feed, A5 short edge feed/long edge feed, B6 short edge feed*1, A6 short edge feed*1, 13 19 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 9 11 long edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed/long edge feed, 5.5 8.5 short edge feed/long edge feed, 813 short edge feed*2, 8K short edge feed, 16K short edge feed/long edge feed Custom: Widthwise 100.0 mm *1*2 to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.9" *1*3 to 13.0", Lengthwise 5.5" to 19.2" Tab paper: A4T long edge feed, 8.5 11T long edge feed *1: Available only for the trays of the 1st unit when the machine is mounted with more than one paper feeder unit. The minimum size for the 2nd and 3rd units is 139.7 mm / 5.5". *2: Use small size guides for paper width less than 139.7 mm / 5.5". B series is set to JIS or ISO standard sizes as the default setting. This setting depends on the destination. For JIS/ISO switching, contact your service representative. Detectable standard sizes can be changed. K sizes can also be detected when the machine is set to use them on the UTILITY screen. For details, refer to [K Size]. |
Continuation Print | ineo+ 6100 (Color/Black) 100 sides/min. (A4 long edge feed, 8.5 11 long edge feed), 78 sides/min. (8.5 11 short edge feed) ineo+ 6085 (Color/Black) 85 sides/min. (A4 long edge feed, 8.5 11 long edge feed), 68 sides/min. (8.5 11 short edge feed) |
Continuous printing | 1 to 9,999 copies |
Memory capacity |
* Integrated Color Care Unit IQ-501 + Video Interface Kit VI-511 mounted: 4 GB extensible. |
Image loss | Leading and trailing edges: 4 mm or less, Front and rear edges: 3 mm or less However, the rear edge of the thick 200 g/m2 / 53 lb Bond or more is 6 mm or less. |
Paper feeding method/capacity | Main body: no paper trays Paper Feed Unit PF-707m or Paper Feed Unit PF-711: 3 paper trays, air suction system, 3 units connectable at maximum
|
Warm-up time | 8 minutes or less (20°C, 50% RH, rated voltage applied) |
Power source | Metric area: AC 220 V to 240 V / 25 A, 50 Hz/60 Hz Inch area: AC 208 V to 240 V / 24 A, 60 Hz |
Maximum power consumption | Metric area: 6,000 W (for the whole system including options at maximum of the main body power system) Inch area: 5,760 W (for the whole system including options at maximum of the main body power system) |
Weight | 440 kg / 970.03 lb (the machine only) |
Dimensions | 950 mm (W)*1 950 mm (D)*2 1,319 mm (H)*3 / 37.40" (W)*1 37.40" (D)*2 51.93" (H)*3 (machine) *1: Excluding the control panel, cyclone box, and work table *2: Including the rear duct *3: Excluding the control panel |
Space requirements | 4,236 mm (W) 1,584 mm (D) *1 / 166.78" (W) 62.36" (D)*1 (Main body + Paper Feed Unit PF-707m + Relay Unit RU-511 + Large Capacity Stacker LS-506 + Finisher FS-532) *1: With the ADU drawer pulled out |
Operating environment | Temperature: 10 to 30°C Humidity: 10 to 80%RH |