External Machine

No.

Name

Description

1

Toner supply door

Opens to allow toner supply.

2

Control panel

Used for various settings and machine operations.

3

Touch panel

Displays screens such as the MACHINE screen to allow various settings and machine operations. Also, operation or troubleshooting procedures can be provided.

4

Sub power switch

Turns machine power on/off when pressed.

5

Service port (USB 2.0 Type A  3)

Used to connect devices such as an external storage medium (USB flash drive, USB-HDD), keyboard and mouse.

This port is available for low-power devices only. Please provide an external supply of power for devices that require a large amount of power. The length of a total cable which connects USB devices should be shorter than 3 m.

6

Working Table WT-512 (option)

Provides a convenient workspace for documents before and after copying.

7

Dual Scan Document Feeder (ADF)

Mounted on Paper Feed Unit PF-711. Automatically feeds multiple originals on a sheet basis to scan data.
Even a 2-sided original can be scanned by one paper feed operation without reversing paper.

8

Right side door

Opens rightward for removal of paper jam.

9

Left side door

Opens to allow removal of paper jam or to turn on/off the main power switch.

10

Waste toner box replacement door

Opens to allow replacement of the waste toner box.

11

Cyclone Box

Prevents toner from scattering in the machine. The cyclone box can be accessed from the inside of the paper feeder unit.

12

Paper feeder unit connection port

Used to connect Paper Feed Unit PF-711 by cable. It is not provided to the machine which does not connect Paper Feed Unit PF-711.

13

Integrated Color Care Unit Connection Port

Used to connect Integrated Color Care Unit IQ-501 by cable.

14

Video Interface Kit Connection Port

Used to mount Video Interface Kit VI-509 (optional).

*Video Interface Kit VI-509 (optional) is required to connect Image Controller IC-313, Image Controller IC-314 or Image Controller IC-315 to this machine by cable.

15

Service port (USB 3.0 Type A 1)

Used to connect Authentication Unit AU-201S.

16

Service port (USB 2.0 Type B 1)

Connect this machine to the computer using a USB cable in order to use it as a local printer.

17

Network port (10Base-T, 100Base-TX, 1000Base-T)

Connected with an image controller or Ethernet cable to use the machine as a network printer or scanner.

18

Dust proof filter

Attached for cooling fan in order to keep out dust.

19

Heater switch

Turns on/off the heater of the machine.

20

Power cord

Supplies the main body with electric power.

21

Lock release lever

Pressed to the back to open downward for removal of paper jam.

The Lock release lever can be reached from the left side optional equipment.