What Is [Multi Half]?

Fold the paper in half.

This function makes a document with the double-sided form, so it is suitable for double-page spreads.

Combining with the [Booklet] function allows you to create a middle-opening book.

NOTICE

One of the following options is required to use this function.

• SaddleStitcher SD-506
• Finisher FS-532 with Saddle Stitcher SD-510 mounted
• Finisher FS-541 with Saddle Stitcher SD-510 mounted
• Saddle Stitcher SD-513

The following functions can also be added depending on the optional devices mounted on this system.

With SaddleStitcher SD-506 mounted:

With Saddle Stitcher SD-513 mounted:

With Finisher mounted:

Tips

• The [Print Side] of [Multi Half] cannot be changed when [Booklet] is set. Therefore, even if a setting is made so that [Booklet] is synchronously enabled in [Fold & Staple Auto Selection], the [Print Side] cannot be changed. For details about [Fold & Staple Auto Selection], refer to [Copy Setting].
• To arrange in page order in [Multi Half], combine with the [Booklet] function. For details about [Booklet], refer to [Booklet].
• [Multi Half] is frequently combined with [Booklet], so the setting may be configured in combination so that [Booklet] of [Application] is enabled. In this case, even if [Multi Half] is set to [Function OFF], [Booklet] remains enabled. When canceling the setting, also check the setting of [Booklet] of [Application].
• The combined setting between [Multi Half] and [Booklet] can be changed in [Fold & Staple Auto Selection]. For details, refer to [Copy Setting].

Screen access

*1: This is displayed when SaddleStitcher SD-506 is mounted.

*2: This is displayed when Saddle Stitcher SD-513 is mounted.