[Set Numbering] ([Preset Stamp])
Overview
Print a numbering (sequence numbers) that is not provided on the original.
This function allows you to set the character format, color, and print position.
Setting Procedure
1
Select [Format].
2
Set the character size. Set the value on the setting screen that is displayed by pressing [Change Text Size].
3
Set the pages to print. Each time you press [Print Page], the setting changes.
Setting value: [All Pages] / [Cover Only]
4
Set the numbering start number. Set the value on the setting screen that is displayed by pressing [Start Number].
Use the on-screen keypad to enter the numeric value.
Pressing [,]/[+] increases or decreases the numeric value by 1.
5
Select the stamp text color.
Set the color on the setting screen that is displayed by pressing [Color].
6
Set the stamp printing position.
Setting value: [Upper Left], [Mid Left], [Lower Left], [Upper Mid], [Mid], [Lower Mid], [Upper Right], [Mid Right], [Lower Right], [Fine Adjustment], [Outside Print]
[Outside Print] prints the stamp outside the spread area. This setting is available when [Booklet] or [Adhesive Binding] is selected.
7
To adjust the stamp printing position with the numeric value, set the value on the setting screen that is displayed by pressing [Fine Adjustment].
Select the key of the direction you want to move to, and use the on-screen keypad to enter the numeric value.
Pressing [,]/[+] increases or decreases the numeric value in increments of 1 mm.
Range: 0 mm to 50 mm (at the top, bottom, left, and right)
8
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.