Adjusting Booklet Finishing
Overview
Adjust the finish by adjusting the position and strength of folds, and the position of staples.
Adjusting the Position of Half Folds
Adjust the half fold position and correct any small deviations on the cover side.
Using [Stapler]
Using [Multi Folder]
Using Saddle Stitcher SD-506
Using Saddle Stitcher SD-513
Adjusting Staple Spacing
Adjust the spacing (pitch) of the staples.
Using Saddle Stitcher SD-506
Using Saddle Stitcher SD-513
Adjusting the Center Position of Staples
Adjust for any misalignment between the Fold and Staple staple positions and the position of the paper half fold.
Using Saddle Stitcher SD-506
Using Saddle Stitcher SD-513
Adjusting Fore-edge Trimming
You can adjust the amount of fore-edge trimming.
Using Saddle Stitcher SD-506
Using Saddle Stitcher SD-513
Adjusting Top / Bottom and 2-Side Slitting
You can adjust the amount of 2-side slitting using Saddle Stitcher SD-513.
Adjusting Spine Corner Forming Fold Flattening Strength
Adjust the strength when forming a stapled and folded booklet spine.
Using Saddle Stitcher SD-513
Adjusting the Crease Position
You can move the crease position in half-folds when using the Saddle Stitcher SD-513. Adjust the distance from the cover lead edge of the output paper's top face to the crease.
in the upper-right of a page, it turns into 
and is registered as a bookmark.