Adjustment Flow for When Using New Types of Paper
Overview
Perform adjustment at the following timings.
When using a new type of paper
When you cannot reproduce colors even after performing the Daily Adjustment Flow (High Precision)
If Using RU Option (Relay Unit RU-518m)
Step 1
Automatically adjust the color reproducibility of all of the output paper.
Step 2
[Density Balance Auto. Adj.]
Perform [Density Balance Adjustment] (With MYIRO-1) or [Density Balance Auto. Adjustment] (When Mounted With Intelligent Quality Optimizer IQ-601), followed by automatic density balance adjustment.
Step 4
Create a printer profile.
If [G7] is set, create a printer profile after performing [G7 Calibration] (for About Advanced [Controller Calibration]).
If [G7] is set, create a printer profile after performing [G7 Calibration] (for About Advanced [Controller Calibration]).
Tips
- If Intelligent Quality Optimizer IQ-601 is not mounted, create a printer profile with AccurioPro ColorManager. For details about AccurioPro ColorManager, refer to the AccurioPro ColorManager User's Guide.
- When using special toner, carry out calibration using a colorimeter. For details, refer to the AccurioPro ColorManager User's Guide.
Reference
- For details about how to create a printer profile when using special toner, refer to How to Set the Printer Profile when Using Special Toner (CMYK + White-coating (S) / Black Paper).
in the upper-right of a page, it turns into 
and is registered as a bookmark.