[Exact Color]
Overview
Carry out calibration using Exact Color.
Adjusting a profile also adjusts the reproduction of not only each single color (CMYK) but also the mixed colors, so adjustment can be performed with higher accuracy than usual.
Tips
- Exact Color is set to this system by default. When you need to switch from G7 calibration to this calibration, contact your service representative.
Setting Procedure
1
Press [+]/[,] of [Number of Print Jobs (Averaging)] to set the number of output charts.
2
Press [Change] of [Paper Tray Setting].
3
Select a paper tray, and press [OK].
The selectable items vary depending on the optional devices mounted on this system.
4
Load paper into the paper tray selected in step 3.
Load paper of A4, A3, 11 e 17, 8.5 e 11, or lengthwise (X) 279.4 mm, widthwise (Y) 210.0 mm / lengthwise (X) 11", widthwise (Y) 8.27" or more in the selected paper tray.
5
Press [Change] of [Screen Type].
The setting screen is displayed.
6
Select the screen type to be used.
For details about screens, refer to[Custom Screen].
7
Set [Auto Gamma Adjustment].
In general use, select [On].
8
Press [Execute] to output a chart.
The output start dialog box is displayed. When output is completed, the display changes to a completion message.
9
Press [Close].
The result is displayed.
in the upper-right of a page, it turns into 
and is registered as a bookmark.