Set the common functions for output offset.
Screen access
Touch panel - [MACHINE] - [Controller] - [Common Setting]
Setting item | Description | |
---|---|---|
[Offset by Job Unit] | [ON] | Performs output offset. |
[OFF] | Does not perform output offset. | |
Set the number of jobs to perform output offset. | ||
[Offset Output Mode] | [Change Out Pos.] | Switches the paper output position on the output tray. |
[Stop Print] | Stops printing. To continue printing, press Start. | |
[Partition Paper] | Inserts partition paper. When setting this item, you need to select the paper tray loaded with partition paper. | |
[Change Out Pos. + Partition Paper] | Switches the paper output position on the output tray, and inserts partition paper. When setting this item, you need to select the paper tray loaded with partition paper. | |
[Partition Paper Tray Setting] | Press [Change] to set the paper tray used for partition paper. This setting is available when [Partition Paper] or [Change Out Pos. + Partition Paper] is selected in [Offset Output Mode]. |