User's Guide
- Home
- Menu
× Menu Useful Software If you have a problem…
- FAQ
- Troubleshooting
HOMECopyFinishing Settings Using the Mounted Optional DevicesUsing Folding Unit FD-503Preventing Multiple Feeding in Post Inserter
Menu
Copy
- Overview of Copy
- Copy Specifications (With Paper Feed Unit PF-711 mounted)
- Copy Operations
- Basic Copy Procedure
- [COPY] Screen
- Positioning the Original
- Setting Print Quantity
- Stopping Job Currently in Process of Scanning/Printing
- Copy Original Setting
- Copy Image Setting
- [Quality Adjustment]: Adjusting the Quality of the Copied Image
- [Zoom] : Setting Copy Zoom
- [Color]: Selecting Color Mode
- Copy Application Setting
- [Application]: Setting to Match Finishing
- Overview of Application
- How to set application
- Display under [Application] on the [COPY] Screen
- [Insert Sheet]: Adding a Front Cover or Insert Paper
- [Combine]: Copying Fixed Number of Pages onto One Sheet
- [Booklet]: Copying as Booklet
- [Adhesive Binding]: Making Copies in the Order of Adhesive Binding
- [Book Copy]: Copying Left and Right Pages of a Two Page Spread Original Separately
- [No Image Area Erase]: Erasing the Non-Image Area
- [Image Repeat]: Repeatedly Copying One Image onto One Paper
- [Frame Center Erase]: Eliminating Black Copy Mark around Border and Center of Book
- [Image Centering]: Copying the Document Area onto the Center of Paper
- [Page Margin]: Adjusting Copy Image Position
- [Stamp]: Copying with Additional Information Printed
- [180 Deg. Rotation]: Rotates the print side of output paper by 180 degrees to output data.
- [Application]: Setting to Match Finishing
- Copy Output Setting
- [Simplex/Duplex]: 1-Sided Copy and 2-Sided Copy Settings
- [Output Setting]: Output Paper Setting
- Paper Setting
- Finishing Settings Using the Mounted Optional Devices
- Using Output Tray OT-510
- Using Saddle Stitcher SD-506
- Using Saddle Stitcher SD-513
- Using Folding Unit FD-503
- Using Perfect Binder PB-503
- Using Large Capacity Stacker LS-506
- Using Finisher FS-532
- Output to Tray
- Sorting Copies to Primary (Main) Tray
- Sorting Copies to Secondary (Sub) Tray
- Stapling Copies
- Creating Half-Fold Booklet
- Tri-Fold Print
- Punching File Holes in Copies
- Using Functions Manually
- Disposing Punch Waste
- Taking Out Sheets From Folder Tray
- Taking Out Printed Sheets from Tray
- Taking Out Printed Sheets from the Primary (Main) Tray Suspended Automatically
- To Suspend the Output Job
- Taking Out Printed Sheets From the Secondary (Sub) Tray Suspended Automatically
- Taking Out Printed Sheets from the Folder Tray Suspended Automatically
- Canceling a Suspended Job
- Using Multi Punch GP-501
- Using Auto Ring Binder GP-502
- Checking the finishing
- Adjustment of this Machine
- Useful Copy Functions
- Interrupt: Interrupting Copy Job
- Registering copy settings in the program
- Reserving a job setting
- Continuing Job on Following Day
- Store Setting: Holding the Scanned Copy Job on this Machine or Saving it on the HDD
- Adjusting the Finishing
Preventing Multiple Feeding in Post Inserter
Multiple sheets may be fed when loaded in the upper tray/lower tray of the post inserter. 
Three feed rollers are attached to each of the upper tray and lower tray, and used for feeding sheets. Locking the rollers on both sides and using only the middle one may be effective in preventing small cover sheets from skewing.
As shown below, push both roller lock levers inside to lock them. 
NOTICE
Be sure to lock the rollers on both sides, when loaded. In normal mode, return the roller lock levers to the original positions.