Auto Paper: Selecting Paper Size Automatically
Auto Paper detects the original size and automatically selects and feeds copy paper of the same size (x1.0 magnification mode), or selects an appropriate size according to the magnification ratio selected (Zoom mode).
Reference
The original sizes to be detected from the ADF or original glass are previously determined. For details, refer to Positioning the Original in ADF and Positioning the Original on Original Glass.
The original sizes to be detected from the original glass can be changed. For details, refer to [Detect Orig. Size on Glass].
An administrator can set a tray to be incompatible with Auto Paper or paper conditions to be incompatible with Auto Paper. For details, refer to [Auto Tray Selection Setting] and [Type for Auto Paper].
The machine can be set to deactivate Auto Paper when the original is loaded in the ADF or on the original glass. For details, refer to [User Setting]: [Copy Setting].
preconditionAuto Paper is incompatible with Auto Zoom, while Image Rotation is available.
preconditionAuto Paper does not select the tray of the size specified as Custom.
Press Reset on the control panel. If the machine is equipped with the ADF, close the ADF securely before pressing Reset.
supplementary explanationIn the default setting, Auto Paper is automatically selected.
Position the original.
The tray loaded with an appropriate paper size is selected automatically.
supplementary explanationA message prompts you that an appropriate size cannot be found in any tray. In this case, load paper of the size referred in the message.
supplementary explanationAuto Paper may not function for the tray due to the paper specifications registered for that tray, even with the selected size loaded. For details, refer to [Type for Auto Paper].