Advanced Options Window

Paper Size

All paper sizes available in this machine

Set a paper size.

Copies

1 to 9999

Specify the number of copies.

This option may not be displayed depending on the application you are using.

Print Quality

600dpi, 1200dpi

Set a resolution.

ICM Method

ICM Disabled, ICM Handled by Host System, ICM Handle by Printer, ICM Handle by Printer using printer calibration

Set an ICM method.

ICM Intent

Graphics, Pictures, Proof, Match

Set the intent of ICM.

Scaling

1% to 1000%

Set an enlarge or reduce ratio.

TrueType Font

Substitute with Device Font, Download as Softfont

Set an output method of a TrueType font.

Advanced Printing Features

Enabled, Disabled

Set this to enable the Pages per Sheet Layout function.

Pages per Sheet Layout

Right then Down, Down then Right, Left then Down, Down then Left

Set this to enable the Pages per Sheet Layout function.

PostScript Options

Optimize for Speed, Optimize for Portability, Encapsulated PostScript (EPS), Archive Format

Set an output option for PostScript. For details, refer to the PostScript guide.

TrueType Font Download Option

Automatic, Outline, Bitmap, Native TrueType

Set an download option for a TrueType font.

PostScript Language Level

1 to 3

Set a PostScript language level.

Send PostScript Error Handler

Yes, No

Set whether to send a PostScript error handler or not.

Mirrored Output

Yes, No

Set Mirrored Output.

Banner Tray

Off, Auto, Tray 1, Tray 2, Tray 3, Tray 4, Tray 5, Tray 6, Tray 7, Tray 8, Tray 9, Tray 10, Tray 11, Bypass Tray

Select a tray to print banner pages.

Screening (Image)

Screen 1, Screen 2, Stochastic

Selects screen group set for image object. Screen type set in Custom Screen(*) on Control Panel of main body is assigned for the selected screen group. Also, image reproducibility changes by screens. Select a screen suitable for the required image quality.

• For details about how to change the screen, refer to Image Quality.

Screening (Text/Graphics)

Screen1, Screen2, Same as Screening(Image)

Selects screen group set for text and graphic object. Screen type set in Custom Screen(*) on Control Panel of main body is assigned for the selected screen group. Also, text and graphic reproducibility changes by screens. Select a screen suitable for the required image quality.

• For details about how to change the screen, refer to Image Quality.

Color Configuration

No Setting, Image Controller Default

Set whether to use the color configuration in the image controller or not.

Feed Direction

Auto, Long Edge, Short Edge

Set a direction to feed paper.

Offset

Off, On

Stagger after each set of copies specified.

Print Position Setting

Off, Left, Center, Right

Set the print position.

Weight

No Setting,

62-74 g/m²,

75-80 g/m²,

81-91 g/m²,

92-105 g/m²,

106-135 g/m²,

136-176 g/m²,

177-216 g/m²,

217-256 g/m²,

257-300 g/m²,

301-350 g/m²,

(When the weight unit is g/m²)

Set weight of print paper.

Colored Paper

No Setting, White, Blue, Goldenrod, Gray, Green, Ivory, Orange, Pink, Red, Yellow, Cream, Others, User Color

Set the color of print paper.

Pre-Punched

Off, On

Set this to print on pre-punched paper.

Output Tray

Default, Open Stacker Main Tray, Stapler Main Tray, Stapler Sub Tray, Stacker Auto, Stacker 1 Main Tray, Stacker 1 Sub Tray, Stacker 2 Main Tray, Stacker 2 Sub Tray, Saddle-Stitcher Sub Tray, Multi Folder Main Tray, Multi Folder Sub Tray, Perfect Binder Sub Tray, External Finisher(Middle), External Finisher(End), Relay Unit 3A Sub Tray, Relay Unit 3B Sub Tray

Select an output tray.

External Finisher(Middle), External Finisher(End)

Off, On

Select this option to use the External Finisher.

Output Order

Face Down, Face Up

Set this to output printed paper with its face up.

N to 1

Off, On, No Setting

Set this to print an original in a reverse order.

Pile Permission

Off, On

When selected On, other jobs can be printed and are permitted to be piled up on the large capacity stacker.

When turned Off, the next job cannot be printed until the current job is removed from the large capacity stacker.

Binding Position

Left Bind, Top Bind, Right Bind, Left Bind (Landscape), Top Bind (Landscape), Right Bind (Landscape)

Set a position to bind when using a function such as Staple and Punch.

Print Type

1-Sided, 2-Sided

Set this to perform 2-sided printing.

Imposition

Off, Booklet, Adhesive Binding, 2 in 1, 2 Repeat, 2 Repeat Reversal (Left), 2 Repeat Reversal (Right), 2 Repeat Reversal (Top), 2 Repeat Reversal (Bottom), 4 Repeat, 4 in 1 (Vertical), 4 in 1 (Horizontal), 8 Repeat

Set this to perform an imposition printing.

Book Spread

Off, On

Set this to perform book spread printing from mixed sized originals in the case of Booklet or Adhesive Binding.

Staple

Off, Left Corner, Right Corner, 2 Positions (Wide), 2 Positions (Narrow), 2 Positions (Narrow+)

Set this when stapling.

Punch

Off, 2-Hole, 3-Hole, 4-Hole, Multi Punch, Double Multi Punch

Set this to punch paper.

Fold

Off, Z-Fold, Fold and Staple, Fold and Staple+Trim, Half-Fold - Inside, Half-Fold - Outside, Tri-Fold-In - Inside, Tri-Fold-In - Outside, Tri-Fold-Out - Inside, Tri-Fold-Out - Outside, Double Parallel-Fold - Inside, Double Parallel-Fold - Outside, Gate-Fold - Inside, Gate-Fold - Outside, Multi Tri-Fold - Inside, Multi Tri-Fold - Outside, Multi Half-Fold - Inside, Multi Half-Fold - Inside+Trim, Multi Half-Fold - Outside, Multi Half-Fold - Outside+Trim

Set the fold function.
Fold and Staple and Fold and Staple+Trim have options of 2 Positions and 4 Positions respectively.

Spine Corner Forming

Off, On

Applies pressure to the spine cover of the booklet processed by Fold & Staple to perform spine corner forming.

Spine Corner Forming Strength

Weak+, Weak, Normal, Strong, Strong+

Specify the spine corner forming strength.

Crease

Off, On

Creases for paper folding are made to prevent toner from peeling when paper is being folded.

Image Shift

Off, On

Select whether to use image shift.

180° Rotate

Off, On

Rotate the image 180 degrees to make prints.

Front Cover

Off, Print, Blank

Set this to add a front cover.

Front Cover Tray

Off, Tray 1, Tray 2, Tray 3, Tray 4, Tray 5, Tray 6, Tray 7, Tray 8, Tray 9, Tray 10, Tray 11, Bypass Tray

Select a tray for a front cover.

Front Cover-Glossy

Off, On

Set this to print a front cover in glossy mode.

Back Cover

Off, Print, Blank

Set this to add a back cover.

Back Cover Tray

Off, Tray 1, Tray 2, Tray 3, Tray 4, Tray 5, Tray 6, Tray 7, Tray 8, Tray 9, Tray 10, Tray 11, Bypass Tray

Select a tray for a front cover.

Back Cover-Glossy

Off, On

Set this to print a back cover in glossy mode.

PI Front Cover Tray

Off, PI Tray 1, PI Tray 2

Set this to print a front cover on paper that is different with the output paper, such as thick paper.

PI Back Cover Tray

Off, PI Tray 1, PI Tray 2

Set this to print a back cover on paper that is different with the output paper, such as thick paper.

Perfect Binding Settings

Off, Cover Blank, Cover Print 1in1, Cover Print 2in1, Cover Print 3in1

Select a cover tray for a perfect binder.

Perfect Binding Glossy

Off, On

Set this when printing a cover in glossy mode for a perfect binder.

Perfect Binding Cover Tray

Off, Tray 1, Tray 2, Tray 3, Tray 4, Tray 5, Tray 6, Tray 7, Tray 8, Tray 9, Tray 10, Tray 11, PI Tray 1, PI Tray 2, PB Cover Tray , Bypass Tray

Select a cover tray for a perfect binder.

Perfect Binding Cover Duplex

Off, On

Set this when printing a 2-sided cover for a perfect binder.

Perfect Binding Cover Trim

Off, On

Set this when trimming a cover for a perfect binder.

Perfect Binding Cover Crease

Off, Spine, Gutter, Spine + Gutter

Creases for paper folding are made to prevent toner from peeling when paper is being folded.

Ring Binding

Off, On

Set this to bind the printed paper using ring-shaped binder.

Printed Side for Top Sheet

Outside Print, Inside Print

Specify the printed side of the top sheet when the Ring Binding is set.

Inside Print : Prints document on inside of the top sheet.

Outside Print: Prints document on outside of the top sheet.

Printed Side for Last Sheet

Inside Print, Outside Print

Specify the printed side of the last sheet when the Ring Binding is set.

Inside Print: Prints document on inside of the last sheet.

Outside Print: Prints document on outside of the last sheet.

Print Mode

Print, Wait Mode, Proof Print, Proof Print (1st Sheet), Hold Job, Hold Job and Print, Spool

Specify the printing method.

When Print is selected, the print job is printed without being stored on any HDD.

When Wait Mode is selected, the print job is saved as an output-reserved job. To output such a print job, press Start on the control panel of this machine.

When Proof Print is selected, the print job is printed only partially, and you can view the print image. This function is helpful for sample printing.

When Proof Print (1st Sheet) is selected, the print job is printed only by the top page, and you can view the print image. This function is helpful for sample printing.

When Hold Job is selected, the print job is held on this machine.

When Hold Job and Print is selected, the print job is held on this machine while it is being printed.

When Spool is selected, the print job is held in the HDD of the machine, and then printed.
It can prevent the intermittent printing that may be observed when printing jobs with a lot of pictures, etc.

For details about Hold Job and Hold Job and Print, refer to Holding Job.

Output Color

Auto Color, Full Color, Gray Scale

Selecting Auto Color prints the original in gray scale mode when the image is made only in K after color conversion, and in color mode when a color image is included after color conversion.

However, if color and monochrome originals are mixed, the original is switched between color and gray scale modes, which reduces productivity.

Selecting Full Color prints the original in color regardless of the color conversion result.

When Full Color is selected, productivity is not reduced because the color mode is not switched for each process.

Selecting Gray Scale prints the original in black and white regardless of the color conversion result.

When Gray Scale is selected, productivity is not reduced because the color mode is not switched for each process.

* The color conversion result varies depending on the color configuration setting.

Smoothing

Off, On

When turned On, you can smoothly print the outline of text with density of 100%, such as K=100%, and line images. The smoothing function is applied only to the part of primary colors (C, M, Y, or K). It is not applied to the area with mixed colors.

Thinning

Off, On

Select this to control the boldness of the text or line images. This setting also has an effect on white characters on a colored background.

Emphasis

Off, On

Set this to enable the outline emphasizing function.

Auto Trapping

Off, On

When selecting On, white spaces generation by off registration is reduced.

Color Text

Off, On

When selecting On, the toner quantity of color text is controlled and the scattering of toner is reduced.

Outline Settings

Off, Text/Graphics, Text/Graphics/Image

The outline of text in gray and figures are printed sharply.

1 Dot Line Emphasis

Off, On

Select this to emphasis an ultrafine line.

Separation Output

Off, On

Print cyan, magenta, yellow, and black separately for each proof.

Use CIE Color

Off, On

Select this when using a CIE color space at printing in gray scale. When Use CIE Color is turned On, the gradation will be better than usual since the printing is processed via the color space defined by CIE, the International Commission on Illumination. However, it may require more time to print.

Glossy

Off, On

Set this to enable the glossy function for the main body.

Rendering (Text)

Perceptual, Saturation

Set this to configure rendering of a text.

Rendering (Graphics)

Perceptual, Saturation

Set this to configure rendering of a graphic.

Rendering (Image)

Perceptual, Saturation

Set this to configure rendering of an image.

Paper Simulation

Off, On

Set this to configure Paper Simulation.

Printer Profile

No Setting, Paper Type Link

Set this to configure a printer profile. Select Paper Type Link to apply a profile that is appropriate for the paper type.

Pure Black

Off, Text, Text/Graphics

Set this to print a black region only with a black toner.

Gray Replacement (RGB)

Off, Text/Graphics, Text/Graphics/Image

Set this to print a black region only with a black toner.

Gray Replacement (CMYK)

Off, Text/Graphics, Text/Graphics/Image

Set this to print a black region only with a black toner.

Black Overprint

Off, On

Set this to prevent white space being generated around an object by overprinting it.

Spot Color

Off, On

Print spot color that is set in an application in adjusted CMYK values.

Alternative Color

Off, On

Convert color to the other color based on the setting defined in the image controller.

Composite Overprint

Off, High Speed, High Quality

Overprint an object that is set to be overprinted in an application.

Auto Image Adjustment

Off, Position/Gradation, Position

Performs the automatic image adjustment depending on the setting you selected when printing.

Date/Time

Off, All Pages, 1st Page Only

Set this to print the date and time.

Font

Gothic 8 pt to 14 pt

Ming 8 pt to 14 pt

Set the font to print Date/Time.

Position

Upper Left, Mid Left, Lower Left, Upper Mid, Mid, Lower Mid, Upper Right, Mid Right, Lower Right

Set the position to print Date/Time.

Date

'10/11/23, Nov 23,2010, 11/23/'10, 23 Nov,2010, 23/11/'10

Set a notation for Date.

Time

Off, 1:23PM, 13:23

Set a notation for Time.

Color

Black, Red, Green, Blue, Yellow, Magenta, Cyan

Set the text color for Date/Time.

Color Bar

Off, Left, Top, Right, Bottom, Image Controller Default

Set a print position for Color Bar.

Color Settings Information

Off, Left, Top, Right, Bottom, Image Controller Default

Set the print position for Color Settings Information.

Number of Lines

1 Line - 5 Lines

Set the number of lines for Color Settings Information.

Printed Items - Date/Time

Off, On

Prints the date and time when printing was executed in Color Settings Information.

Printed Items - Job Name

Off, On

Prints the name of the currently executed print job in Color Settings Information.

Printed Items - User Name

Off, On

Prints the name of the user who printed a job in Color Settings Information

Printed Items - Calibration Date/Time

Off, On

Prints the date and time when calibration has been carried out, in Color Settings Information.

Printed Items -Printer Name/Model Name

Off, On

Prints the machine name and model name in Color Settings Information.

Printed Items - ROM Version

Off, On

Prints the ROM version of the image controller in Color Settings Information.

Printed Items - RGB Color Conversion

Off, On

Prints the type of the profile for RGB color conversion in Color Settings Information.

Printed Items - CMYK Color Conversion

Off, On

Prints the usage status of CMYK color conversion in Color Settings Information.

Printed Items - Tone Curve Name

Off, On

Prints the currently used tone curve name, in Color Settings Information.

Printed Items - Spot Color

Off, On

Prints whether to use spot colors in Color Settings Information.

Printed Items - Alternative Color

Off, On

Prints whether to use alternative colors in Color Settings Information.

Printed Items - Composite Overprint

Off, On

Prints the usage status of Composite Overprint in Color Settings Information.

Printed Items - Black Treatment

Off, On

Prints whether to use Black Handling in Color Settings Information.

Printed Items - Screening

Off, On

Prints the currently used screen setting, in Color Settings Information.

Printed Items - Comment

Off, On

A comment can be printed for up to 200 characters in Color Settings Information. However, printing may be cut off depending on the number of printed pages or the number of lines.

Printed Items - Character Size

4pt to 36pt

Specify the print font size in Color Settings Information.