Overview of Copy
- Overview of Copy Function
- Available Operations for Copy Function
Copy Specifications
Copy Operations
- Basic Copy Procedure
- COPY Screen
- Positioning the Original
  - Positioning the Original in ADF
  - Positioning the Original on Original Glass
- Setting Print Quantity
  - Setting Print Quantity
  - Changing entered print quantity
- Stopping Job Currently in Process of Scanning/Printing
Copy Original Setting
- Original Setting: Setting the Original
- Direction: Setting Direction of Original
- Separate Scan: Handling Scanned Original as Single Job
Copy Image Setting
- Quality Adjustment: Adjusting the Quality of the Copied Image
- Zoom : Setting Copy Zoom
- Color: Selecting Color Mode
Copy Application Setting
- Application: Setting to Match Finishing
Copy Output Setting
- Simplex/Duplex: 1-Sided Copy and 2-Sided Copy Settings
- Output Setting: Output Paper Setting
Paper Setting
Finishing Settings Using the Mounted Optional Devices
Checking the finishing
Adjustment of this Machine
Useful Copy Functions
- Interrupt: Interrupting Copy Job
- Registering copy settings in the program
- Reserving a job setting
  - Reserving a job setting
  - Reserving Copy Jobs during Warm-up
- Continuing Job on Following Day
- Store Setting: Holding the Scanned Copy Job on this Machine or Saving it on the HDD
Adjusting the Finishing

Interrupt: Interrupting Copy Job

Use the Interrupt mode to interrupt copying in progress to copy with different settings temporarily.

Pressing Interrupt on the control panel stops the machine operation temporarily at the timing available for interrupt copying and allows you to copy with different settings.

When interrupt copying is completed, the settings for the previous job is restored automatically.

Even if Interrupt is pressed, the Interrupt mode is not available in the following conditions.

Machine is outputting all data in memory or scanning the original.
The Service Call message displays or a paper misfeed occurs.
Already using Interrupt mode.
The machine mounted with Image Controller IC-605 is operating Prior Print, or a Prior Print job is on the list of reserved jobs.
The job list includes one or more jobs (job running or job reserved) which Auto Image Adjustment is set to ON.

preconditionReserve job cannot be operated in Interrupt mode.
preconditionAuto Low Power or Auto Shut OFF does not function during Interrupt mode.
preconditionInterruption Suspend Setting can be set in Utility Menu. For details, refer to User Setting: Copy Setting.

Press Interrupt on the control panel.
The Interrupt LED flashes until the machine is ready for Interrupt mode. When the machine is ready for Interrupt mode, the message Ready to copy is displayed in the message area and the Interrupt LED turns steady, then the COPY tab is changed to the INTERRUPT tab.
The COPY screen for interrupt copying is displayed.
Make copy selections, as desired.
All copy conditions except Reserve mode can be specified.
- supplementary explanationWhen Interruption Suspend Setting is set to Stop Immediately, Application is unavailable.
- supplementary explanationWhen Interruption Suspend Setting is set to Stop Immediately, you cannot recall the settings registered in the Copy Mode Memory.
Position the original on the original glass or ADF, then press Start on the control panel to start the interrupt copying.
- supplementary explanationDuring interrupt copying, the interrupt job is displayed at the top of the Reserved Job list in the JOB LIST screen.
When Interrupt copying is completed, press Interrupt again.
The Interrupt LED is turned off and Interrupt mode is canceled. The machine restores the settings to the settings before interrupting to restart the operation that is performed before interrupting.
- supplementary explanationInterrupt mode is not canceled automatically after interrupt copying is finished. However, the mode is canceled when Auto Reset functions.