COPY Screen

The COPY screen is displayed when you make a copy. This screen allows you to select the desired copy conditions, print, and reserve jobs.

No.

Name

Description

1

Original Setting

Displays the Original Setting screen which allows you to set conditions of the original to be copied. Direction keys provided under the Original Setting screen can also be used to select the direction of the original. The following types of icons appear under Original Setting.
•Displays an icon for the direction of the original specified in Direction.
•Displays an icon for the function that is specified in Type.
•Displays a text for the function that is specified in Special.
•Displays an icon when Thin is selected in Thickness.
•When you select Custom or Tab Paper in Original Size, the selected size is displayed.
•Sets the function to remove dust on the slit scan glass when the original, running through the ADF, is scanned on it. For details, contact your service representative.

2

Quality Adj.

Displays the Quality Adjustment screen to adjust the quality of output images. A maximum of 3 manually specified quality adjustment items are displayed under Quality Adj.. A maximum of 4 shortcut keys for frequently used quality adjustment functions are displayed under Quality Adj.. The density setting can also be displayed in addition to shortcut keys. For details, refer to Shortcut Key Register.

3

Auto Zoom

Highlighted when Auto Zoom is on. And pressed when using the Auto Zoom function.

4

Zoom

Displays the Zoom screen for setting x1.0, Auto Zoom, Vert./Horiz. Zoom, Enlarge, Reduce, and Set Zoom Ratio. Keys below Zoom on the COPY screen can be used for specifying Set Zoom Ratio, x1.0, and Auto Zoom.

5

Zoom setting button

To set the Vert./Horiz. Zoom ratio, press - or +. To select the same magnification (100 %), press x1.0. To select Set Zoom Ratio, press a button on which set zoom ratio is displayed.

6

COPY tab

Displays the COPY screen to perform copy operations.

7

Set Number indicator

Indicates the print quantity entered from the keypad on the control panel.

8

Simplex/Duplex

Selects the Simplex/Duplex copy mode.
If the original is not positioned, the Duplex button may not be displayed.

9

Application

Displays the Application screen to select application functions. A maximum of 6 icons for set application functions are displayed in the icon display area under Application. Up to four specified application functions are displayed as shortcut keys.

10

Output Setting

Displays the Output Setting screen to select the Bind Direction and Face/Order, and to set the Output. Set output settings are displayed as icons in the area under Output Setting. A maximum of 4 shortcut keys for frequently used output functions are displayed under Output Setting.

11

Web Browser

Displays a Web browser on the touch panel. If the machine is connected to the Internet, you can view external web pages.

12

Info. Sound/Voice ON/OFF

Press this to temporarily turn the speaker sound off.

This option is available only when UTILITY - User Setting - System Setting - Operation/Info. Sound Setting - Volume Setting - Speaker Sound is set to ON.

13

Help

Displays the help message which provides information on the screen currently displayed. Depending on the screen, the help key may be dimmed and cannot be selected. When the MACHINE screen is displayed, Help displays the method to replace a toner bottle or waste toner box, add staples, dump staples, punch, or trim scraps, supply glue pellets, load paper, and replenish water to the humidifier tank.

14

Output information indicator

The upper part shows the print quantity of the current print job and set quantity. The lower part shows the job number of the current print job and a user name (when a user name is entered for user authentication) or a section name (when a section name is entered for section authentication).

15

Machine management information indicator

The left side displays the original counter and the number of reserved jobs (unit: number).
The right side displays the remaining amount of memory and the file system (unit: %). With the Auto Inspection Unit UK-301 connected, two items with less remaining amount among the five items (memory and file system in the main body, memory in the Auto Inspection Unit UK-301, reference image memory, and inspection report memory) are displayed. Items other than the remaining amount of the file system in the main body can be indicated in GB as needed.

16

Paper Setting

Press this to specify paper conditions for each of Main Body Tray, Paper Feeder Unit PF-602m or Paper Feed Unit PF-707m, Multi Bypass Tray MB-506, Multi Bypass Tray MB-508, Large Capacity Unit LU-202m, Large Capacity Unit LU-202XL, Large Capacity Unit LU-202XLm, Banner Tray Unit MK-740, Output tray reinforcing unit for banner MK-740m, Post Inserter PI-502 - upper tray / lower tray, Folding Unit FD-503 - Post Inserter - upper tray / lower tray, and Perfect Binder PB-503 - Cover Tray.

17

Tray information indicator

Indicates the paper size, loading direction, paper name, weight, remaining amount of paper, paper color, punch hole setting, and both sides adjustment setting for each tray of Main Body Tray, Paper Feeder Unit PF-602m, Paper Feed Unit PF-707m, Multi Bypass Tray MB-506,Multi Bypass Tray MB-508, Large Capacity Unit LU-202m, Large Capacity Unit LU-202XL, Large Capacity Unit LU-202XLm, Banner Tray Unit MK-740, and Output tray reinforcing unit for banner MK-740m.

18

Image Rotation OFF

Activates/Deactivates the Image Rotation function.

19

Auto Paper

This key is highlighted when the Auto Paper function operates. And pressed when using the Auto Paper function.

20

Shortcut key

Display up to 6 Copy Mode Memory shortcut keys.

21

Machine status indicator/right

Displays Fuser (Env.), USB Drive, Y-Toner, M-Toner, C-Toner, K-Toner, PM Call, ADF Clean, Consumable, Torque, Un-Comp., Security, Modem Err, ORU-M, and Dark Tone. Up to 4 indicators can be displayed in large size. When 5 or more indicators are displayed, small icons without texts will substitute for the indicators from the 4th and onward. The maximum number of items displayed is a total of 7, including 3 normal-sized icons and 4 small-sized icons.

22

Machine status indicator/left

Displays the current time or the status of the image controller.

23

Store Setting

Holds jobs to be copied or saves them on the HDD.

24

Color setting keys

Selects one for color mode from Single Color, Black, Full Color, or Auto Color.

25

Direction keys

Selects the direction of the original placed on ADF or the original glass.

26

Separate Scan

Temporarily saves the scanned image information of originals to be copied in memory. This button is used for printing multiple originals that are scanned separately at one time.

27

Message area

Displays messages concerning the current status of the machine or operation currently required.