Overview of Copy
- Overview of Copy Function
- Available Operations for Copy Function
Copy Specifications
Copy Operations
- Basic Copy Procedure
- COPY Screen
- Positioning the Original
  - Positioning the Original in ADF
  - Positioning the Original on Original Glass
- Setting Print Quantity
  - Setting Print Quantity
  - Changing entered print quantity
- Stopping Job Currently in Process of Scanning/Printing
Copy Original Setting
- Original Setting: Setting the Original
- Direction: Setting Direction of Original
- Separate Scan: Handling Scanned Original as Single Job
Copy Image Setting
- Quality Adjustment: Adjusting the Quality of the Copied Image
- Zoom : Setting Copy Zoom
- Color: Selecting Color Mode
Copy Application Setting
- Application: Setting to Match Finishing
Copy Output Setting
- Simplex/Duplex: 1-Sided Copy and 2-Sided Copy Settings
- Output Setting: Output Paper Setting
Paper Setting
Finishing Settings Using the Mounted Optional Devices
Checking the finishing
Adjustment of this Machine
Useful Copy Functions
- Interrupt: Interrupting Copy Job
- Registering copy settings in the program
- Reserving a job setting
  - Reserving a job setting
  - Reserving Copy Jobs during Warm-up
- Continuing Job on Following Day
- Store Setting: Holding the Scanned Copy Job on this Machine or Saving it on the HDD
Adjusting the Finishing

Individually changing the horizontal and vertical magnification ratios

Specify any value for each of the horizontal and vertical magnification ratios, and make a copy of which the proportion of height and width is different.

For Vert. Zoom and Horiz. Zoom, individually specify the magnification ratio within the range from 0.250 to 4.000 in 0.001 (0.1%) increments.

Tips

A service setting is required to use this function. For details, contact your service representative.

Press the COPY tab to display the COPY screen.
Press Zoom.
The Zoom screen is displayed.
Specify the desired magnification ratio.
Select Vertical Zoom or Horizontal Zoom, then press the keypad on the screen or press the down or the up key to enter the magnification ratio.
- supplementary explanationIf wrong number is entered, continue by entering the correct number from the beginning.
- supplementary explanationKeep pressing down or up to change the ratio in 0.001 (0.1%) steps at first, and then in 0.010 (1%) steps.
Press OK.
The screen returns to the COPY screen.
The horizontal and vertical magnification ratios are displayed under Zoom.