- Home
- Menu
× Menu Useful Software If you have a problem…
- FAQ
- Troubleshooting
Menu
Copy
- Overview of Copy
- Copy Specifications
- Copy Operations
- Basic Copy Procedure
- COPY Screen
- Positioning the Original
- Setting Print Quantity
- Stopping Job Currently in Process of Scanning/Printing
- Copy Original Setting
- Copy Image Setting
- Quality Adjustment: Adjusting the Quality of the Copied Image
- Zoom : Setting Copy Zoom
- Color: Selecting Color Mode
- Copy Application Setting
- Application: Setting to Match Finishing
- Overview of Application
- How to set Application
- Display under Application on the COPY Screen
- Insert Sheet: Adding a Front Cover or Insert Paper
- Combine: Copying Fixed Number of Pages onto One Sheet
- Booklet: Copying as Booklet
- Adhesive Binding: Making Copies in the Order of Adhesive Binding
- Book Copy: Copying Left and Right Pages of a Two Page Spread Original Separately
- No Image Area Erase: Erasing the Non-Image Area
- Image Repeat: Repeatedly Copying One Image onto One Paper
- Frame Center Erase: Eliminating Black Copy Mark around Border and Center of Book
- Image Centering: Copying the Document Area onto the Center of Paper
- Page Margin: Adjusting Copy Image Position
- Stamp: Copying with Additional Information Printed
- 180 Deg. Rotation: Rotates the print side of output paper by 180 degrees to output data.
- Program Job: Collectively Outputting Multiple Copy Jobs
- Application: Setting to Match Finishing
- Copy Output Setting
- Simplex/Duplex: 1-Sided Copy and 2-Sided Copy Settings
- Output Setting: Output Paper Setting
- Paper Setting
- Finishing Settings Using the Mounted Optional Devices
- Using Output Tray OT-510
- Using Output Tray OT-511
- Using Saddle Stitcher SD-506
- Using Saddle Stitcher SD-513
- Using Folding Unit FD-503
- Using Perfect Binder PB-503
- Using Large Capacity Stacker LS-506
- Using Finisher FS-531
- Using Finisher FS-532
- Output to Tray
- Sorting Copies to Primary (Main) Tray
- Sorting Copies to Secondary (Sub) Tray
- Stapling Copies
- Creating Half-Fold Booklet
- Tri-Fold Print
- Punching File Holes in Copies
- Using Functions Manually
- Disposing Punch Waste
- Taking Out Sheets From Folder Tray
- Taking Out Printed Sheets from Tray
- Taking Out Printed Sheets from the Primary (Main) Tray Suspended Automatically
- To Suspend the Output Job
- Taking Out Printed Sheets From the Secondary (Sub) Tray Suspended Automatically
- Taking Out Printed Sheets from the Folder Tray Suspended Automatically
- Canceling a Suspended Job
- Using Finisher FS-612
- Using Multi Punch GP-501
- Using Auto Ring Binder GP-502
- Checking the finishing
- Adjustment of this Machine
- Useful Copy Functions
- Interrupt: Interrupting Copy Job
- Registering copy settings in the program
- Reserving a job setting
- Continuing Job on Following Day
- Store Setting: Holding the Scanned Copy Job on this Machine or Saving it on the HDD
- Adjusting the Finishing
Scanning Job
Press Stop on the control panel.
The current machine operation of the selected job will be suspended, and a dialog is displayed.
Specify what to do with the suspended job.
supplementary explanationPress Cancel Job to cancel the job. All the scanned data will be cleared.
supplementary explanationPress Continue to resume the job.
supplementary explanationPress Temporary Stop to suspend the job. In this case, originals that have not yet been scanned are left in the Original Tray of the ADF. Press Start on the control panel to resume the job.
supplementary explanationPress Stop at a Set to suspend the job when a set currently output is completed. When originals that have not yet been scanned are left in the Original Tray of ADF, all the originals in the Original Tray are scanned and output to the original catch tray. If you press Start on the control panel, all the scanned information is output as a copy job. Stop at a Set is displayed when Image Controller IC-605 is mounted.
