Printer P: Change the Information

You can change the information of the saved printer profile.

1. Click Printer Profile on Profile Management screen.

   • supplementary explanationSimilar operation can be done by selecting, on the File menu, Profile Type - Printer Profile.

2. From the tree view and the list, select the Printer Profile to change the information.

   • supplementary explanationFor details about how to connect another image controller, refer to Switch the Image Controller to Connect.

   • supplementary explanationWhen you reload the information of the image controller connected currently, select File menu - Reload.

3. Click Change Table Information.

   The Change Table Information screen is displayed.

   • supplementary explanationWhen you select the multiple Printer Profile, Change Table Information is not available.

   • supplementary explanationSimilar operation can be done when you select File menu - Change Table Information.

   • supplementary explanationIf the profile has an asterisk * in its name, you can change only its paper type link.
     If the profile has an at sign @ in its name, you can change only its paper type link and its memo.

4. If necessary, enter Saved Name.

   You can enter up to 31 one-byte characters (31 two-byte characters).

   • supplementary explanationYou cannot save the Printer Profile of the same name with those in the image controller.

5. Select Paper Type Link, as required.

6. If necessary, enter Memo.
   You can enter up to 64 one-byte characters (32 two-byte characters).

7. Click OK.

   The Printer Profile information is changed.