User's Guide
- Home
- Menu
× Menu Useful Software If you have a problem…
- FAQ
- Troubleshooting
Menu
Color Centro
- Overview of Color Centro
- Color Centro Specifications
- Settings of this machine
- Installing and Uninstalling Color Centro
- Before Installing Color Centro
- Installation of Color Centro
- Uninstalling Color Centro
- Connecting Color Centro
- Calibration
- Overview of Calibration
- Calibration Manager Screen
- Calibration Flow
- Changing the Method
- Confirming Conditions
- Changing the Colorimeter
- Changing Paper and Screen
- Executing Calibration
- Measuring the Accuracy
- Executing Exact Color Calibration
- Calibrate by Using G7 Calibration
- Specify Grouping Setting
- Calibration Data Management
- Tone Curve Adjustment
- Overview of Tone Curve Adjustment
- Tone Curve Adjustment Screen
- Select Sample Screen
- Tone Curve Management Screen
- Tone Curve Adjustment Flow
- Selecting an Image
- Confirming an Image
- Create Tone Curves
- Load Tone Curves
- Adjustment of Tone Curves: Brightness and Contrast
- Adjust the Tone Curve: Each Color
- Confirming the Result of the Adjustment
- Canceling the Adjustment
- Save the Tone Curves
- Management of Tone Curves
- Color Configuration Management
- Overview of Color Configuration
- Color Configuration Management Screen
- Color Configuration Management Flow
- Create a Color Configuration
- Editing and Registering a Color Configuration
- Specify a Default Profile Set and Paper Type Default
- Changing the Color Conversion Setting
- Management of Color Configurations
- Creation of a Profile Set
- Editing a Profile in a Profile Set
- Improvement of Accuracy of a Profile Set
- Adjustment of Color Conversion of a Profile Set
- Management of Profile Sets
- Color Default Settings
- Color Default Settings Screen
- Color Default Setting Flow
- Confirming the Color Configuration Default
- Changing the Default RGB Color Conversion Setting
- Changing the Default CMYK Color Conversion Setting
- Changing the Default Printer Profile Setting
- Changing the Default Color Conversion Setting
- Registering Settings
- Resetting
- Specify Information of a Job and a Color Bar
- Spot Color
- Spot Color Screen
- Initializing the Spot Color screen
- Spot Color Table Management Screen
- Spot Color Management Flow
- Create a Spot Color Table
- Load a Spot Color Table
- Creating a Spot Color
- Spot Color Adjustment
- Management of Spot Colors
- Save a Spot Color Table
- Management of Spot Color Tables
- Alternative Color Management
- Alternative Color Management Screen
- Alternative Color Management Flow
- Creating an Alternative Color
- Alternative Color Management
- Register an Alternative Color Table
- Profile Management
- Profile Management Screen
- CMYK Target Profile: Creation
- Printer Profile: Creation
- RGB-CMYK Device Link Profile: Creation
- RGB-CMYK Device Link Profile: Editing
- CMYK-CMYK Device Link Profile: Creation
- CMYK-CMYK Device Link Profile: Editing
- Management of RGB Source Profile
- Management of CMYK Target Profile
- Management of Printer Profiles
- Management of RGB-CMYK Device Link Profile
- Management of CMYK-CMYK Device Link Profile
- Other Functions
Changing the Colorimeter
This section describes how to select a colorimeter.
preconditionTo use a colorimeter, install its device driver on your computer.
On the Calibration Manager screen, click Settings menu - Instrument and then select a colorimeter.
supplementary explanationM0: Illuminant A
M1: Illuminant D50
M2: Illuminant A (UV filter)
supplementary explanationGo to Calibration Flow.
Tips
To use FD-9, install its utility software.
To use i1iO, use Windows.
To use i1iO, use Exact Color for advanced calibration.