Printer P: Duplicating a Profile

You can make a duplication of the printer profile in the image controller, to the image controller.

1. Click Printer Profile on Profile Management screen.

   • supplementary explanationSimilar operation can be done by selecting, on the File menu, Profile Type - Printer Profile.

2. From the tree view, select Controller.

   The list appears according to the selection.

   • supplementary explanationFor details about how to connect another image controller, refer to Switch the Image Controller to Connect.

3. From the list, select the Printer Profile to copy.

   • supplementary explanationWhen you reload the information of the image controller connected currently, select File menu - Reload.

4. Click Copy.

   Displays the Copy screen.

   • supplementary explanationWhen you select the multiple printer profiles, Copy is not available.

   • supplementary explanationWhen a folder other than Controller is selected on the tree view, Copy is not available.

   • supplementary explanationYou can also click the File menu - Copy.

5. Click Saved Name.

   You can enter up to 31 one-byte characters (31 two-byte characters).

   • supplementary explanationYou cannot save the printer profile of the same name with those in the image controller.

6. Select Paper Type Link.

7. If necessary, enter Memo.
   You can enter up to 64 one-byte characters (32 two-byte characters).

8. Click OK.

   The duplication of the Printer Profile is generated in the image controller.