- Home
- Menu
× Menu Useful Software If you have a problem…
- FAQ
- Troubleshooting
Menu
Color Centro
- Overview of Color Centro
- Color Centro Specifications
- Settings of this machine
- Installing and Uninstalling Color Centro
- Before Installing Color Centro
- Installation of Color Centro
- Uninstalling Color Centro
- Connecting Color Centro
- Calibration
- Overview of Calibration
- Calibration Manager Screen
- Calibration Flow
- Changing the Method
- Confirming Conditions
- Changing the Colorimeter
- Changing Paper and Screen
- Executing Calibration
- Measuring the Accuracy
- Executing Exact Color Calibration
- Calibrate by Using G7 Calibration
- Specify Grouping Setting
- Calibration Data Management
- Tone Curve Adjustment
- Overview of Tone Curve Adjustment
- Tone Curve Adjustment Screen
- Select Sample Screen
- Tone Curve Management Screen
- Tone Curve Adjustment Flow
- Selecting an Image
- Confirming an Image
- Create Tone Curves
- Load Tone Curves
- Adjustment of Tone Curves: Brightness and Contrast
- Adjust the Tone Curve: Each Color
- Confirming the Result of the Adjustment
- Canceling the Adjustment
- Save the Tone Curves
- Management of Tone Curves
- Color Configuration Management
- Overview of Color Configuration
- Color Configuration Management Screen
- Color Configuration Management Flow
- Create a Color Configuration
- Editing and Registering a Color Configuration
- Specify a Default Profile Set and Paper Type Default
- Changing the Color Conversion Setting
- Management of Color Configurations
- Creation of a Profile Set
- Editing a Profile in a Profile Set
- Improvement of Accuracy of a Profile Set
- Adjustment of Color Conversion of a Profile Set
- Management of Profile Sets
- Color Default Settings
- Color Default Settings Screen
- Color Default Setting Flow
- Confirming the Color Configuration Default
- Changing the Default RGB Color Conversion Setting
- Changing the Default CMYK Color Conversion Setting
- Changing the Default Printer Profile Setting
- Changing the Default Color Conversion Setting
- Registering Settings
- Resetting
- Specify Information of a Job and a Color Bar
- Spot Color
- Spot Color Screen
- Initializing the Spot Color screen
- Spot Color Table Management Screen
- Spot Color Management Flow
- Create a Spot Color Table
- Load a Spot Color Table
- Creating a Spot Color
- Spot Color Adjustment
- Management of Spot Colors
- Save a Spot Color Table
- Management of Spot Color Tables
- Alternative Color Management
- Alternative Color Management Screen
- Alternative Color Management Flow
- Creating an Alternative Color
- Alternative Color Management
- Register an Alternative Color Table
- Profile Management
- Profile Management Screen
- CMYK Target Profile: Creation
- Printer Profile: Creation
- RGB-CMYK Device Link Profile: Creation
- RGB-CMYK Device Link Profile: Editing
- CMYK-CMYK Device Link Profile: Creation
- CMYK-CMYK Device Link Profile: Editing
- Management of RGB Source Profile
- Management of CMYK Target Profile
- Management of Printer Profiles
- Management of RGB-CMYK Device Link Profile
- Management of CMYK-CMYK Device Link Profile
- Other Functions
Switch the Image Controller to Connect
Disconnect the image controller that is currently connected, and then connect with another image controller.
preconditionIf some settings are not saved, register them in the image controller or save them on the computer before finishing the connection.
preconditionTo connect with an image controller, the IP address and port number of the image controller are required. For details, refer to the following.
Settings of this machineConnect Printer ScreenpreconditionConfirm that the image controller can communicate. For details, refer to the following.
Start Color Centro
Click Printer - Change Connection on the Color Centro screen.
The Connect Printer screen is displayed.
When another screen is displayed, Change Connection is not available.
supplementary explanationWhen the Connect Printer screen is displayed, the Color Centro screen is not available.
On the Connect Printer screen, select the image controller to connect with Color Centro and click Connect.
supplementary explanationThe destination switches.