Adjusting the Output Tray
The Output Tray OT-511 can be equipped with three restriction plates. When outputting paper A3 
, A4 
, 11 
17 , or 8.5 11 , install restriction plates to enhance the alignment of sheets loaded in the output tray.
Installing restriction plates
When outputting paper A3 , A4 , 11 17 , or 8.5 11 , install restriction plates.
Restriction plates need not be always installed. They are useful when paper extends out the output tray or you want to perform output alignment.
When outputting paper of a size that goes over the restriction plates, remove them. Otherwise, paper interferes with the restriction plates, causing an output failure.