Home CopyImage Repeat

Image Repeat

It will scan the image area specified by the selected paper size and mode ([2 Repeat], [4 Repeat], [8 Repeat]), then arrange the image by specified times in one copy paper.

Use [2 Repeat] in designated order mode to have the same cut side when cutting copied sheets in two.

Original positioning

Output

[2 Repeat]

[4 Repeat]

[8 Repeat]

  • The [Auto Zoom] button is dimmed and [x1.0] is set automatically. Magnification can be changed manually, however, Image Rotation is unavailable. The scanning area will be a portion of the selected paper size equally divided according to the selected mode.

  • When [2 Repeat] is selected, the direction of the image to be repeated can be specified.

  1. Position the original.

    Both ADF and original glass are available. The scanning area varies according to the selected paper size, orientation of copy paper, and selected repeat mode.

    • For the scanning area and orientation of copy paper, refer to "Scanning area of the original and orientation of copy paper."

  2. Press [Application] on the [COPY] screen.

  3. Press [Image Repeat] on the [Application] screen.

  4. Select any of [2 Repeat], [4 Repeat] or [8 Repeat].

    • You can select [R/Down-Reverse] or [L/Up-Reverse] under [2 Repeat in Designated Order], and specify the direction of the screen to be repeated in [2 Repeat].

  5. Press [OK] to complete the setting.

    To resume the original settings, press [Cancel].

    To cancel the Image Repeat function with the current setting saved, press [Function OFF].

  6. Press [OK] on the [Application] screen to return to the [COPY] screen.

    The [Repeat] icon and shortcut key are displayed under [Application] on the [COPY] screen.

    [Auto Zoom] and [Auto Paper] are deselected.

  7. Select an entry in the tray list under [Paper].

  8. Select additional copy conditions, as desired.

  9. Enter the desired print quantity from the keypad on theĀ control panel.

  10. Press Start on the control panel.

    • Printing does not start without returning to the [COPY] screen. Be sure to display the [COPY] screen.

Scanning area of the original and orientation of copy paper

[2 Repeat]

[4 Repeat]

[8 Repeat]

Paper in landscape orientation

Paper in portrait orientation

Paper in landscape orientation

Paper in portrait orientation

Paper in landscape orientation

Paper in portrait orientation

Repeated images of landscape original

Repeated images of landscape original

Repeated images of landscape original

Paper in landscape orientation

Paper in portrait orientation

Paper in landscape orientation

Paper in landscape orientation

Paper in landscape orientation

Paper in landscape orientation

Repeated images of portrait original

Repeated images of portrait original

Repeated images of portrait original

2 Repeat - Specifying the orientation of repeated image

Select [R/D-Reverse] or [L/U-Reverse] for 2 Repeat mode to obtain output images as illustrated below. This function allows you to have the same cut side when cutting copied sheets in two.

  • This function can be combined with [Set Numbering], [Page No.], and [Date/Time]. For details, contact your service representative.

2 Repeat: [R/D-Reverse]

2 Repeat: [L/U-Reverse]

Landscape original

Repeated images

Landscape original

Repeated images

Portrait original

Repeated images

Portrait original

Repeated images