Selecting an Output Tray
This section describes how to select an output tray.
Position the original.
Press [Output Setting] on the [COPY] screen.
The [Output Setting] screen is displayed.
The front image of the machine shows tray positions available for delivery, including the tray currently selected.
Press the desired tray position button "
."The square key for the selected tray is highlighted on the front image of the machine in the [Output Setting] screen.
When Large Capacity Stacker LS-506 is mounted, [Pile Set] is displayed. If two Large Capacity Stacker LS-506 units are mounted, [Stacker Auto] is displayed. For details, refer to Switching Stacker Automatically.
Withdraw the delivery tray of the saddle stitcher, if selected as an output tray.
When using the delivery tray of the saddle stitcher, be sure to fully withdraw it. Open the tray stand located under the delivery tray of the saddle stitcher when fully withdrawing it.
Never return the delivery tray to its original position with the tray stand opened.
Press [OK] on the [Output Setting] screen.
The screen returns to the [COPY] screen.
Output trays each have a limit in capacity. Be careful not to exceed the limit, otherwise unexpected trouble may be caused.