Select an output mode by following the procedure below.
The initial setting of the output mode can be changed. For details, refer to Copy Initial Setting: Setting the Default Copy Conditions.
Position the original.
Press the [COPY] tab to display the [COPY] screen.
Press [Output Setting].
The [Output Setting] screen is displayed.
On the front image of the machine in the [Output Setting] screen, the tray currently selected is highlighted.
Select the desired output mode.
Select one of [Offset Sort], [Sort], [Offset Group], and [Group] keys.
Selecting [Offset Sort] or [Offset Group] displays the screen to specify the output offset. Use the touch panel keypad to enter the desired number of sets to be offset. Available range is from 1 to 9,999. When finished with the entry, press [OK].
Select either [Face Up] or [Face Down], and either [1 to N] or [N to 1] provided under [Face/Order], as needed.
Selecting [N to 1] automatically sets and limits the Face mode to [Face Up].
Press [OK] on the [Output Setting] screen.
An icon representing specified function is displayed under [Output Setting] on the [COPY] screen.
Up to 150 sheets can be loaded into the output tray. Be careful not to exceed the limit, otherwise unexpected trouble may be caused