No Image Area Erase: Erasing the Non-Image Area
Use this function to have the machine detect the original size placed on the original glass, then make a copy eliminating the area of the glass outside the borders of the original.
Original positioning | Output | |
|---|---|---|
[Normal] mode | [No Image Area Erase] | |
|  |  |
Position the original on the original glass. The ADF should be kept open.
The size of the original should be larger than 30 mm
30 mm.
Position the original. The ADF should be kept open.
Do not close the ADF.
Press [Application] on the [COPY] screen.
Press [No Image Area Erase] on the [Application] screen.
The incompatible function keys will be dimmed to show inactivity.
Press [OK] on the [Application] screen to return to the [COPY] screen.
The Non-Image Area Erase icon and shortcut key are displayed under [Application] on the [COPY] screen.
Auto Paper and Auto Zoom buttons are dimmed and [x1.0] magnification is set.
Select additional copy conditions, as desired.
The available copy modes are [1->1] and [1->2]. Selecting [1->2] sets Separate Scan automatically.
Enter the desired print quantity from the keypad on the control panel.
Press Start on the control panel.
Printing does not start without returning to the [COPY] screen. Be sure to display the [COPY] screen.
If the lighting in the work place is directly over the original glass, No Image Area Erase may not function properly. In this case, consult your service representative about an appropriate place for installation.
The administrator can set the machine to obtain the optimum copy result of No Image Area Erase based on the working environment by manually specifying the density level of the original and the erase mode. For details, refer to Erase Operation Setting: Setting the Original Density for Erasing the Outside of the Original.