Configure the network settings for the image controller.
This section describes the machine settings.
[TCP/IP Settings]: Specify the IP address on this machine.
[JSP Setting]: Specify [JSP Setting] to [ON], and [Authentication Setting] to [Invalid].
The initial port numbers are 30081 and 30082. Normally, you do not need to change them.
JSP stands for JavaServer Pages.
SSL and TLS: To use SSL or TLS, execute the following steps. To connect to Color Centro, select the port number and [SSL/TLS] in Color Centro.
Registration of device certificate
Setting of [Use SSL/TLS] and [Port Number (SSL/TLS)]