This section describes the basic operation of the [Calibration Manager] screen.
Select the calibration method.
For details, refer to Selection of a Calibration Method.
Specifies a colorimeter.
For details, refer to Select a Colorimeter.
Check the calibration state.
For details, refer to Check the Calibration Status.
Set the paper type and screen.
For details, refer to Specify a Paper Type and a Screen.
Execute calibration.
For details, refer to Calibrate.
Execute accuracy measurement.
For details, refer to Measure the Calibration Accuracy.
Execute the advanced calibration (Exact Color or G7 Calibration).
For details, refer to one of the following:
Calibrate by Using Exact Color
Calibrate by Using G7 Calibration
If necessary, reset the Calibration data.
For details, refer to Reset the Calibration Data.