Set network information for Image Controller IC-603 here. For details about network information of Image Controller IC-313 or Image Controller IC-417, refer to each user's guide.
The NIC Setting can also be set using the PageScope Web Connection. See Network Tab for details.
* Some items may not be included in the PageScope Web Connection.
Menu Item/Description | Setting Items/Options (with default bolded) | |||||||
---|---|---|---|---|---|---|---|---|
TCP/IP Settings This screen allows you to configure settings to connect the machine to a TCP/IP environment and use it. The IP address can be checked and its acquisition method can be set, the DNS server can be set in the current operating environment, and the IPsec setting can be made based on the safety communication technology as follows. | ||||||||
TCP/IP Settings | ON, OFF | |||||||
IPv4 Settings | ||||||||
IP Application Method *1 | Manual Input, Auto Input | |||||||
Manual Input | ||||||||
IP Address | 0.0.0.0 (0 to 255) | |||||||
Subnet Mask | 0.0.0.0 (0 to 255) | |||||||
Default Gateway | 0.0.0.0 (0 to 255) | |||||||
Auto Input | ||||||||
DHCP Setting | ON, OFF | |||||||
BOOTP Setting | ON, OFF | |||||||
ARP/PING Setting | ON, OFF | |||||||
AUTO IP Setting | ON, OFF | |||||||
IPv6 Settings | ON, OFF *2 | |||||||
Auto IPv6 Settings | ON, OFF *3 | |||||||
DHCPv6 Setting | ON, OFF | |||||||
Global Address | 0000:0000:0000:0000:0000: 0000:0000:0000 (1 to 39 bytes) *4 | |||||||
Prefix Length | 1 to 128 (0) | |||||||
Link Local Address | fe80: xxxx (where, "xxxx" is the Mac address) | |||||||
Gateway Address | 0000:0000:0000:0000:0000: 0000:0000:0000 (1 to 39 bytes) *7 | |||||||
DNS Host | ||||||||
DNS Host Name | Up to 63 one-byte characters can be used. | |||||||
Dynamic DNS Setting | Enable, Disable | |||||||
DNS Domain | ||||||||
Domain Name Auto Obtain | Enable, Disable | |||||||
Search Domain Name Auto | Enable, Disable | |||||||
DNS Default Domain Name | Up to 251 one-byte characters can be used. *9 | |||||||
DNS Search Domain Name 1 | Up to 251 one-byte characters can be used. *9 | |||||||
DNS Search Domain Name 2 | Up to 251 one-byte characters can be used. *9 | |||||||
DNS Search Domain Name 3 | Up to 251 one-byte characters can be used. *9 | |||||||
DNS Server Settings (IPv4) | ||||||||
DNS Server Auto Setting | Enable, Disable | |||||||
Primary DNS Server | 0.0.0.0 (0 to 255) | |||||||
Secondary DNS Server 1 | 0.0.0.0 (0 to 255) | |||||||
Secondary DNS Server 2 | 0.0.0.0 (0 to 255) | |||||||
DNS Server Settings (IPv6) | ||||||||
DNS Server Auto Setting | Enable, Disable | |||||||
Primary DNS Server | 0000:0000:0000:0000:0000: 0000:0000:0000 (1 to 39 bytes) | |||||||
Secondary DNS Server 1 | 0000:0000:0000:0000:0000: 0000:0000:0000 (1 to 39 bytes) | |||||||
Secondary DNS Server 2 | 0000:0000:0000:0000:0000: 0000:0000:0000 (1 to 39 bytes) | |||||||
IPsec Setting/IPsec Settings IPsec is a technique that prevents data falsification or data leakage on an IP packet basis using the encryption technology. | ||||||||
IKE Settings Configure settings to create an IPsec common key. | ||||||||
IKEv1 Settings | ||||||||
Encryption Algorithm | DES-CBC, 3DES-CBC, AES-CBC | |||||||
AES Key Length Settings *5 | ON, OFF 128, 192, 256, 128 and 192, 192 and 256, All | |||||||
Authentication Algorithm | MD5, SHA-1, SHA-2 | |||||||
SHA-2 Key Length Settings *6 | ON, OFF 256, 384, 512, 256 and 384, 384 and 512, All | |||||||
Diffie-Hellman Group | Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24 | |||||||
Key Valid Time | 600 to 604800 (28800) (sec.) | |||||||
Negotiation Mode | Main Mode, Aggressive Mode | |||||||
IKEv2 Settings | ||||||||
Encryption Algorithm | DES-CBC, 3DES-CBC, AES-CBC | |||||||
AES Key Length Settings *5 | ON, OFF 128, 192, 256, 128 and 192, 192 and 256, All | |||||||
Authentication Algorithm | MD5, SHA-1, SHA-2, AES-XCBC | |||||||
SHA-2 Key Length Settings *6 | ON, OFF 256, 384, 512, 256 and 384, 384 and 512, All | |||||||
Diffie-Hellman Group | ||||||||
Priority 1 | Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24 | |||||||
Priority 2 | Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF | |||||||
Priority 3 | Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF | |||||||
Priority 4 | Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF | |||||||
Key Valid Time | 600 to 604800 (28800) (sec.) | |||||||
IPsec SA Settings Set SA (Security Association) used to establish an encryption communication. | ||||||||
Group 1 to Group 10 | ON, OFF | |||||||
Group Name | Up to 10 one-byte characters can be used. | |||||||
Encapsulation Mode | Tunnel Mode, Transport Mode | |||||||
Tunnel End Point | IPv4 address or IPv6 address (Max. 39 bytes) | |||||||
Security Protocol | AH, ESP | |||||||
Key Exchange Method | IKEv1, IKEv2, Manual Key | |||||||
Authentication Method | Pre-Shared Key, Digital Signature | |||||||
Local Authentication Method | Pre-Shared Key, Digital Signature | |||||||
Peer Authentication Method | Pre-Shared Key, Digital Signature, Pre-Shared Key/Digital Signature | |||||||
ESN | Enable, Invalid | |||||||
Replay Detection | Enable, Invalid | |||||||
ESP Encryption Algorithm | AES_CBC, AES_CTR, DES_CBC, AES-GCM-64, 3DES_CBC, AES-GCM, NULL, ENC-NULL-AES-GMAC | |||||||
AES-CBC Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||||
AES-CTR Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||||
AES-GCM Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||||
AES-GCM-64 Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||||
ENC-NULL-AES-GMAC Key Len | 128, 192, 256, 128 and 192, 192 and 256, All | |||||||
ESP Authentication Algorithm | MD5, SHA-1, SHA-2, AES-XCBC | |||||||
SHA-2 Key Length | 256, 384, 512, 256 and 384, 384 and 512, All | |||||||
AH Auth. Algorithm | MD5, SHA-1, SHA-2, AES-GMAC, AES-XCBC | |||||||
SHA-2 Key Length | 256, 384, 512, 256 and 384, 384 and 512, All | |||||||
AES-GMAC Key Length | 128, 192, 256, 128 and 192, 192 and 256, All | |||||||
Perfect Forward Secrecy | Use, Not Use | |||||||
Diffie-Hellman Group (IKEv1) | 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, OFF | |||||||
Diffie-Hellman Group (IKEv2) | ||||||||
Priority 1 | Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24 | |||||||
Priority 2 | Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF | |||||||
Priority 3 | Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF | |||||||
Priority 4 | Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF | |||||||
Encryption Algorithm | DES_CBC, 3DES_CBC, AES_CBC, NULL | |||||||
AES Key Length | 128, 192, 256 | |||||||
Authentication Algorithm | MD5, SHA1, SHA2, AES-XCBC | |||||||
SHA2 Key Length | 256, 384, 512 | |||||||
SA Index | ||||||||
Receive | 256 to 4294967295 | |||||||
Send | 256 to 4294967295 | |||||||
Common Keys for Enc. | ||||||||
Receive | ||||||||
Send | ||||||||
Common Keys for Auth. | ||||||||
Receive | ||||||||
Send | ||||||||
Destroy Time after Setup | 600 to 604800 (3600) (sec.) | |||||||
Peer | ||||||||
Group 1 to Group 10 | ON, OFF | |||||||
Group Name | Up to 10 one-byte characters can be used. | |||||||
Set IP Address | Unicast, Subnet Settings, Set Range | |||||||
Unicast | IPv4 Address Input, IPv6 Address Input | |||||||
Subnet Settings | IP Address: IPv4 Address Input, IPv6 Address Input Subnet Mask: IPv4 Address Input, IPv6 Address Input | |||||||
Set Range | From IP Address: IPv4 Address Input, IPv6 Address Input To IP Address: IPv4 Address Input, IPv6 Address Input | |||||||
Pre-Shared Key | ||||||||
ASCII input | Up to 128 one-byte characters can be used. | |||||||
Hexadecimal input | Up to 256 one-byte characters can be used. | |||||||
Key-ID Key | Up to 128 one-byte characters can be used. | |||||||
Protocol Setting | ||||||||
Group 1 to Group 10 | ON, OFF | |||||||
Group Name | Up to 10 one-byte characters can be used. | |||||||
Protocol Identification Setting | TCP, UDP, ICMP, ICMPv6, Do Not Set | |||||||
Port Specification Method | Port Number, Set Range | |||||||
Port Number | Source Port Number: 1 to 65535 Destination Port Number: 1 to 65535 | |||||||
Set Range | Source Port Number/Start Number: 1 to 65535 Source Port Number/End Number: 1 to 65535 Destination Port Number/Start Number: 1 to 65535 Destination Port Number/End Number: 1 to 65535 | |||||||
Message Type (ICMP, ICMPv6) | Echo Request/Reply, Do Not Set | |||||||
IPsec Setting/Enable Ipsec | ON, OFF | |||||||
IPsec Policy | ||||||||
Group 1 to Group 10 | ||||||||
Group Name | Up to 10 one-byte characters can be used. | |||||||
Peer | 1 to 10 keys | |||||||
Protocol | 1 to 10 keys | |||||||
IPsec Setting | 1 to 10 keys | |||||||
Communication Type | Send and Receive, Send, Receive | |||||||
Action | Protected, Allow, Deny, Cancel | |||||||
Common Settings | ||||||||
Dead Peer Detection | 15, 30, 45, 60, 75, 90, 105, 120 | |||||||
Cookies | Enable, Invalid | |||||||
ICMP Pass Settings | Enable, Invalid | |||||||
ICMPv6 Pass Settings | Enable, Invalid | |||||||
Default Action | Allow, Deny | |||||||
Certificate Verification Level Settings | ||||||||
Expiration Date | Confirm, Do Not Confirm | |||||||
Key Usage | Confirm, Do Not Confirm | |||||||
Chain | Confirm, Do Not Confirm | |||||||
Expiration Date Confirmation | Confirm, Do Not Confirm | |||||||
IPsec Setting - Communication Check | ||||||||
Check Connection | ||||||||
IP Address | IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes) | |||||||
Check Connection | ||||||||
Communication Error Log | Logs 1 to 20 | |||||||
IP Filtering(Permit Access) | Enable, Disable Range 1: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) *11 Range 2: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 3: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 4: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 5: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) | |||||||
IP Filtering(Deny Access) | Enable, Disable Range 1: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) *11 Range 2: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 3: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 4: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) Range 5: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) | |||||||
RAW Port Number | ||||||||
Port 1 | 1 to 65535 (9100), Do Not Use *10 | |||||||
Port 2 | 1 to 65535 (9112), Do Not Use | |||||||
Port 3 | 1 to 65535 (9113), Do Not Use | |||||||
Port 4 | 1 to 65535 (9114), Do Not Use | |||||||
Port 5 | 1 to 65535 (9115), Do Not Use | |||||||
Port 6 | 1 to 65535 (9116), Do Not Use | |||||||
LLMNR Setting | Enable, Disable | |||||||
NetWare Settings Configure the network settings to use this machine by connecting to the Netware environment such as IPX. | ||||||||
1 IPX Setting | ON, OFF | |||||||
Ethernet Frame Type | Auto Detect, 802.2, 802.3, Ethernet II, 802.3SNAP | |||||||
2 NetWare Print Settings | ON, OFF | |||||||
NetWare Print Mode | Pserver, Nprinter/Rprinter | |||||||
PServer Settings | ||||||||
Print Server Name | Up to 63 one-byte characters can be used. | |||||||
Print Server Password | Up to 63 one-byte characters can be used. | |||||||
Polling Interval | 1 to 65535 (1) (sec.) | |||||||
NDS/Bindery Setting | NDS, NDS & Bindery | |||||||
File Server Name | Up to 47 one-byte characters can be used. | |||||||
NDS Context Name | Up to 191 one-byte characters can be used. | |||||||
NDS Tree Name | Up to 63 one-byte characters can be used. | |||||||
Nprinter/Rprinter Set | ||||||||
Print Server Name | Up to 63 one-byte characters can be used. | |||||||
Printer Number | 0 to 255 (255) | |||||||
Status | ||||||||
Server Name | Up to 47 one-byte characters can be used. | |||||||
Queue Name | Up to 127 one-byte characters can be used. | |||||||
HTTP Server Settings Select whether or not to enable the PageScope Web Connection (PSWC) or configure the IPP print usage environment. | ||||||||
HTTP Server Settings | ON, OFF | |||||||
PSWC Settings | ON, OFF | |||||||
IPP Settings | ON, OFF | |||||||
Accept IPP Jobs | ON, OFF | |||||||
Support Information | ||||||||
Print Job | ON, OFF | |||||||
Valid Job | ON, OFF | |||||||
Cancel Job | ON, OFF | |||||||
Open Job Attributes | ON, OFF | |||||||
Open Job | ON, OFF | |||||||
Open Printer Attributes | ON, OFF | |||||||
Printer Information | ||||||||
Printer Name | Up to 127 one-byte characters can be used. | |||||||
Printer Location | Up to 127 one-byte characters can be used. | |||||||
Printer Information | Up to 127 one-byte characters can be used. | |||||||
Print URI | Unmodifiable | |||||||
IPP Authentication Settings | ON, OFF | |||||||
General Settings | Requesting-user-name, basic, digest | |||||||
User Name | user Up to 20 one-byte characters can be used. | |||||||
Password | pass Up to 20 one-byte characters can be used. | |||||||
realm | IPP Up to 127 one-byte characters can be used. | |||||||
FTP Settings Configure an environment of usage for FTP transmission (such as Scan to FTP) or usage of FTP server functionality provided to this machine. | ||||||||
FTP TX Settings The scanned original data can be sent to the FTP server. The settings described in this section are always required if you want to use Scan to FTP. | ON, OFF | |||||||
Proxy Server Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Proxy Server Port Number | 1 to 65535 (21) | |||||||
PASV Mode | Enable, Disable | |||||||
Connection Timeout | 5 to 300 (60) (sec.) | |||||||
FTP Server Settings This machine can be used as an FTP Server, and it can be linked to an application that operates as the FPT client. | ON, OFF | |||||||
Rejected Commands | Allow, PASV/EPSV, PORT/EPRT | |||||||
Enhanced PORT Command Security | Enable, Disable | |||||||
SMB Settings Configure an environment of usage for SMB (Server Message Block), such as Scan to SMB. | ||||||||
Client Settings The scanned original data can be sent to the shared folder. The settings described in this section are always required if you want to use Scan to SMB. | ON, OFF | |||||||
SMB Authentication Setting *8 | NTLMv1, NTLMv2, NTLMv1/NTLMv2, Kerberos | |||||||
Kerberos Authentication Failure Setting | Use NTLM V1/V2, Do Not Use NTLM | |||||||
User Authentication (NTML) | ON, OFF | |||||||
DFS Setting | ON, OFF | |||||||
Single Sign-On Settings | ||||||||
Default Domain Name | Up to 64 one-byte characters can be used. | |||||||
SMB Sever Settings Use this machine as an SMB Server, and set the SMB Printing and SMB File Sharing. | ON, OFF | |||||||
SMB Sever Common Settings | ||||||||
SMB Host Name | Up to 15 one-byte characters can be used. | |||||||
Work Group | WORKGROUP Up to 15 one-byte characters can be used. | |||||||
SMB Authentication Protocol | SMB1.0, SMB1.0/SMB2.0 | |||||||
SMB Signature Setting | Invalid, Only When Required, Necessary | |||||||
SMB Print Setting | ON, OFF | |||||||
Print Service Name | Up to 12 one-byte characters can be used. | |||||||
WINS/NetBIOS Settings Set this item to use the WINS Server. | ON, OFF | |||||||
Auto Setting | Enable, Disable | |||||||
WINS Server Address 1 | 0.0.0.0 (0 to 255) | |||||||
WINS Server Address 2 | 0.0.0.0 (0 to 255) | |||||||
Node Type Setting | B Node, P Node, M Node, H Node | |||||||
Direct Hosting Setting Specify whether to use the Direct Hosting SMB Service. | ON, OFF | |||||||
LDAP Settings Register and set the LDAP Server, and set the destination search from the Active Directory. | ||||||||
Enabling LDAP Set whether to use the LDAP Server for destination search. When sending the scanned original data, you can search for an E-mail address from the LDAP Server. | ON, OFF | |||||||
Setting Up LDAP Set the LDAP Server address and others. | ||||||||
Max. Search Results | 5 to 100 (100) | |||||||
Timeout | 5 to 300 (60) (sec.) | |||||||
Initial Setting for Search Details | ||||||||
Name | OR, AND, START WITH, ENDS WITH | |||||||
OR, AND, START WITH, ENDS WITH | ||||||||
Dial Number | OR, AND, START WITH, ENDS WITH | |||||||
Last Name | OR, AND, START WITH, ENDS WITH | |||||||
First Name | OR, AND, START WITH, ENDS WITH | |||||||
City | OR, AND, START WITH, ENDS WITH | |||||||
Company Name | OR, AND, START WITH, ENDS WITH | |||||||
Department | OR, AND, START WITH, ENDS WITH | |||||||
Server Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Search Base Specify the start point of search when you search for users to authenticate. | Up to 255 one-byte characters can be used. Entry example: "cn=users,dc=example,dc=com" | |||||||
SSL Setting | ON, OFF | |||||||
Port Number | 1-65535 (389) | |||||||
Port Number (SSL) | 1 to 65535 (636) | |||||||
Certificate Verification Level Settings | ||||||||
Expiration Date | Confirm, Do Not Confirm | |||||||
Key Usage | Confirm, Do Not Confirm | |||||||
Chain | Confirm, Do Not Confirm | |||||||
Expiration Date Confirmation | Confirm, Do Not Confirm | |||||||
CN | Confirm, Do Not Confirm | |||||||
Authentication Type | Anonymous, Simple, Digest-MD5, GSS-SPNEGO, NTML v1, NTML v2 | |||||||
Select Sever Auth.Method | Use Settings, Use Dynamic Authentication | |||||||
Referral Setting | ON, OFF | |||||||
Login Name | Up to 255 one-byte characters can be used. | |||||||
Password | Up to 128 one-byte characters can be used. | |||||||
Domain Name | Up to 64 one-byte characters can be used. | |||||||
Check Connection | ― | |||||||
All Reset Setting | Yes, No | |||||||
E-mail Settings Configure the settings to send and receive E-mails (including Scan to E-mail). | ||||||||
E-mail TX (SMTP) Set the E-mail transmission from this machine. The setting is required to use the Scan to E-mail. | ON, OFF | |||||||
SMTP Server Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Binary Division | ON, OFF | |||||||
Divided Mail Size | 100 to 15000 (500) (step: 100) (K byte) | |||||||
Connection Timeout | 30, 60, 90, 120, 150, 180, 210, 240, 270, 300 (sec.) | |||||||
Server Capacity | 0 to 100 (M bytes) (0) Specify "0" to make it unlimited. | |||||||
SSL/TLS Settings | SMTP over SSL, Start TLS, OFF | |||||||
Port No. | 1-65535 (25) | |||||||
Port Number (SSL) | 1 to 65535 (465) | |||||||
Certificate Verification Level Settings | ||||||||
Expiration Date | Confirm, Do Not Confirm | |||||||
Key Usage | Confirm, Do Not Confirm | |||||||
Chain | Confirm, Do Not Confirm | |||||||
Expiration Date Confirmation | Confirm, Do Not Confirm | |||||||
CN | Confirm, Do Not Confirm | |||||||
Detail Settings | ||||||||
SMTP Authentication | ON, OFF | |||||||
User ID | Up to 255 one-byte characters can be used. | |||||||
Password | Up to 128 one-byte characters can be used. | |||||||
Domain Name | Up to 253 one-byte characters can be used. | |||||||
Authentication Setting | Use Settings, Use User Authentication | |||||||
POP before SMTP Authentication | ON, OFF | |||||||
POP before SMTP Time | 0 to 60 (0) | |||||||
E-Mail Rx (POP) Set the E-mail reception from this machine. | ON, OFF | |||||||
POP Server Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Connection Timeout | 30, 60, 90, 120, 150, 180, 210, 240, 270, 300 (sec.) | |||||||
SSL Setting | ON, OFF | |||||||
Port No. | 1-65535 (110) | |||||||
Port Number (SSL) | 1 to 65535 (995) | |||||||
Certificate Verification Level Settings | ||||||||
Expiration Date | Confirm, Do Not Confirm | |||||||
Key Usage | Confirm, Do Not Confirm | |||||||
Chain | Confirm, Do Not Confirm | |||||||
Expiration Date Confirmation | Confirm, Do Not Confirm | |||||||
CN | Confirm, Do Not Confirm | |||||||
Login Name | Up to 63 one-byte characters can be used. | |||||||
Password | Up to 15 one-byte characters can be used. | |||||||
APOP Authentication | ON, OFF | |||||||
S/MIME Communication Setting | Use, Not Use | |||||||
Digital Signature | Do not add signature, Always add signature | |||||||
Digital Signature Type | SHA-1, SHA-256 | |||||||
SNMP Settings Configure the settings to acquire machine information or monitor the machine by using Simple Network Management Protocol (SNMP). | ||||||||
SNMP Settings | ON, OFF | |||||||
SNMP v1/v2c (IP) | ON, OFF | |||||||
SNMP v3 (IP) | ON, OFF | |||||||
SNMP v1 (IPX) | ON, OFF | |||||||
UDP Port Number | 1 to 65535 (161) | |||||||
SNMP V1/V2C Settings | ||||||||
Read Community Name Settings | public Up to 15 one-byte characters can be used. | |||||||
Write Setting | Enable, Disable | |||||||
Write Community Name Settings | private Up to 15 one-byte characters can be used. | |||||||
SNMP V3 Settings | ||||||||
Context Name Settings | Up to 63 one-byte characters can be used. | |||||||
Discovery User Permission | ON, OFF | |||||||
Discovery User Name Set | public Up to 32 one-byte characters can be used. *12 | |||||||
Read User Name Setting | initial Up to 32 one-byte characters can be used. *12 | |||||||
Security Level | OFF, auth-password, auth-password/priv-password | |||||||
Password Setting | ||||||||
Read auth | AuthPassword 8 to 32 one-byte characters can be used. | |||||||
Read priv | PrivPassword 8 to 32 one-byte characters can be used. | |||||||
Write User Name Setting | restrict Up to 32 one-byte characters can be used. *12 | |||||||
Security Level | OFF, auth-password, auth-password/priv-password | |||||||
Password Setting | ||||||||
Write auth | 8 to 32 one-byte characters can be used. MAC Address (colons ":" excluded) | |||||||
Write priv | 8 to 32 one-byte characters can be used. MAC Address (colons ":" excluded) | |||||||
Encryption Algorithm | DES, AES-128 | |||||||
Authentication Algorithm | MD5, SHA-1 | |||||||
TRAP Setting Select whether to allow you to notify the status of this machine using the SNMP TRAP function. | Allow, Restrict | |||||||
TRAP Setting When Authentication Failed | Enable, Invalid | |||||||
AppleTalk Settings Configure the AppleTalk operation environment. | ||||||||
AppleTalk Settings | ON, OFF | |||||||
Printer Name | Up to 31 one-byte characters can be used. | |||||||
Zone Name | * Up to 31 one-byte characters can be used. | |||||||
Current Zone | Unmodifiable | |||||||
Bonjour Setting In use on Mac OS, configure an environment of usage for Bonjour. | ||||||||
Bonjour Setting | ON, OFF | |||||||
Bonjour Name | Up to 63 one-byte characters can be used. The name related to this machine may already be displayed as the default. | |||||||
TCP Socket Settings Specifies whether to enable functions like a communication with the TWAIN driver (TCP Socket settings) and like tray information in the PageScope Web Connection related to Flash Player (TCP Socket (ASCII Mode)). | ||||||||
1 TCP Socket | ON, OFF | |||||||
Use SSL/TLS | ON, OFF | |||||||
Port Number | 1-65535 (59158) | |||||||
Port Number (SSL/TLS) | 1 to 65535 (59159) | |||||||
2 TCP Socket (ASCII Mode) | ON, OFF | |||||||
Port Number (ASCII Mode) | 1 to 65535 (59160) | |||||||
WebDAV Settings Configure an environment of usage for WebDAV transmission (such as Scan to WebDAV) or usage of WebDAV server functionality provided to this machine. | ||||||||
WebDAV Client Settings The scanned original data can be sent to the WebDAV server. The settings described in this section are always required if you want to use the Scan to WebDAV. | ON, OFF | |||||||
Proxy Server Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Proxy Server Port Number | 1-65535 (8080) | |||||||
User Name | Up to 63 one-byte characters can be used. | |||||||
Password | Up to 63 one-byte characters can be used. | |||||||
Chunk Transmission | ON, OFF | |||||||
Connection Timeout | 5 to 300 (60) (sec.) | |||||||
Server Auth. Character Code | UTF-8, Windows Code Pages | |||||||
Certificate Verification Level Settings | ||||||||
Expiration Date | Confirm, Do Not Confirm | |||||||
Key Usage | Confirm, Do Not Confirm | |||||||
Chain | Confirm, Do Not Confirm | |||||||
Expiration Date Confirmation | Confirm, Do Not Confirm | |||||||
CN | Confirm, Do Not Confirm | |||||||
WebDAV Server Settings This machine can be used as a WebDAV Server, and it can be linked to an application that operates as the WebDAV client. | ON, OFF | |||||||
SSL Setting | Non-SSL Only, SSL Only, SSL/Non-SSL*14 | |||||||
Password Setting | ||||||||
Password Setting | sysadm You can enter up to 64 one-byte characters. | |||||||
Initial Password | ||||||||
DPWS Settings Configure the usage environment of Web service function (Devices Profile for Web Services or DPWS). | ||||||||
DPWS Common Settings This screen allows you to configure settings to detect the machine via Web service. | ||||||||
Friendly Name | Up to 62 one-byte characters can be used. | |||||||
Publication Service | Enable, Invalid | |||||||
SSL Setting | ON, OFF | |||||||
Certificate Verification Level Settings | ||||||||
Expiration Date | Confirm, Do Not Confirm | |||||||
Key Usage | Confirm, Do Not Confirm | |||||||
Chain | Confirm, Do Not Confirm | |||||||
Expiration Date Confirmation | Confirm, Do Not Confirm | |||||||
DPWS Extension Settings Configure this setting to use the proxy server and to print or scan data by Web services. | ||||||||
1 Enable Proxy | ON, OFF | |||||||
2 Register Proxy | Proxy 1 to 3 | |||||||
Host Name | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
File Path | Up to 255 one-byte characters can be used. | |||||||
SSL Setting | ON, OFF | |||||||
Port Number | 1 to 65535 (80) | |||||||
Printer Setting Configure this setting to print data via Web service. | ON, OFF | |||||||
Printer Name | Up to 63 one-byte characters can be used. | |||||||
Printer Location | Up to 63 one-byte characters can be used. | |||||||
Printer Information | Up to 63 one-byte characters can be used. | |||||||
Scanner Settings Configure this setting to scan data via Web service. | ON, OFF | |||||||
Scanner Name | Up to 63 one-byte characters can be used. | |||||||
Scanner Location | Up to 63 one-byte characters can be used. | |||||||
Scanner Information | Up to 63 one-byte characters can be used. | |||||||
Connection Timeout | 30 to 300 (120) (sec.) | |||||||
SSDP Settings Configure this setting to use the SSDP (Simple Service Discovery Protocol) and to find the service that the machine can provide from software and other services on the network. | ||||||||
SSDP Settings | ON, OFF | |||||||
Multicast TTL Settings As needed, change TTL (Time To Live) of the SSDP multi-cast packet. | 1 to 10 (1) | |||||||
Detail Settings | ||||||||
Device Setting Check the MAC address of this machine, and set the network speed. | ||||||||
MAC Address | ||||||||
LLTD Setting Select whether to use LLTD (Link Layer Topology Discovery). Using LLTD displays this machine on the network map in a Windows computer of Windows 7 or later (Windows 7/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2). | Enable, Disable | |||||||
Network Speed | Auto (10M/100Mbps), Auto (10M/100M/1Gbps), 10Mbps Half-Duplex, 10Mbps Full-Duplex, 100Mbps Half-Duplex, 100Mbps Full-Duplex, 1Gbps Full-Duplex | |||||||
Time Adjustment Setting Configure the settings to automatically adjust the date and time of this machine, using the NTP (Network Protocol Server). | ||||||||
Auto IPv6 Retrieval | ON, OFF | |||||||
NTP Server Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Port Number | 1 to 65535 (123) | |||||||
Set Date | ||||||||
Auto Time Adjustment | ON, OFF | |||||||
Polling Interval | 1 to 240 (24) (hrs) | |||||||
Status Notification Setting Configure this setting to send a notification to the specified destination when an alert such as paper jam is issued by this machine. | ||||||||
1 Register Notification Address - IP Addresses 1 to 5 | ON, OFF | |||||||
Host Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Port Number | 1 to 65535 (162) | |||||||
Community Name | public Up to 15 one-byte characters can be used. | |||||||
Notification Items | ON, OFF Service Call, Paper JAM, Replenish Paper Tray, Replenish Toner, PM Call, Replace Staples, Finisher Tray Full, Empty Hole-Punch Scrap Box, Waste Toner Box Full, Empty Staple Scrap Box, Bind Parts Supply, HDD (Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full | |||||||
1 Register Notification Address - IPX Address | ON, OFF | |||||||
Network Address | 00: 00: 00: 00 | |||||||
Node Address | 00: 00: 00: 00: 00: 00 | |||||||
Community Name | public Up to 15 one-byte characters can be used. | |||||||
Notification Items | ON, OFF Service Call, Paper JAM, Replenish Paper Tray, Replenish Toner, PM Call, Replace Staples, Finisher Tray Full, Empty Hole-Punch Scrap Box, Waste Toner Box Full, Empty Staple Scrap Box, Bind Parts Supply, HDD (Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full | |||||||
1 Register Notification Address - E-mail Addresses 1 to 5 | ON, OFF | |||||||
Edit E-mail Address | Up to 256 one-byte characters can be used. | |||||||
Notification Items | ON, OFF Service Call, Paper JAM, Replenish Paper Tray, Replenish Toner, PM Call, Replace Staples, Finisher Tray Full, Empty Hole-Punch Scrap Box, Waste Toner Box Full, Empty Staple Scrap Box, Bind Parts Supply, HDD (Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full | |||||||
PING Confirmation Check the connection between this machine and a destination device by using the ping function. | ||||||||
PING TX Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Check Connection | ||||||||
SLP Setting Configure this setting to enable the Service Location Protocol (SLP), and to control this machine by the TWAIN driver via the network. | Enable, Disable | |||||||
LPD Setting Enable the Line Printer Daemon (LPD) to allow LPR (LPD) printing. | Enable, Disable | |||||||
Cert. Verifi. Setting Specify to validate the certificate of the destination device. *10 | ON, OFF | |||||||
Use SSL Version Set the SSL version to use. *10 | SSL3.0, TLS1.0, TLS1.1, TLS1.2 | |||||||
AD Auth. LDAP over SSL Specify to use LDAP over SSL with Active Directory authentication. | ||||||||
AD Auth. LDAP over SSL | Enable, Invalid | |||||||
AD Auth. LDAP over SSL; Port No. | 1 to 65535 (636) | |||||||
Network Setting Clear Return the Network Settings of this machine to the factory default. | Start | |||||||
IEEE802.1X Authentication Setting Configure IEEE802.1X authentication settings. Using IEEE802.1x authentication allows you to connect only the devices permitted by the administrator to the LAN environment. The unauthenticated devices cannot be joined in the network, enabling you to ensure a good security. | ||||||||
IEEE802.1X Authentication Settings | ON, OFF | |||||||
Auth. Status | ||||||||
Reset Job Settings | ||||||||
Certificate Verification Level Settings | ||||||||
Expiration Date | Confirm, Do Not Confirm | |||||||
CN | Confirm, Do Not Confirm | |||||||
Chain | Confirm, Do Not Confirm | |||||||
IWS Settings *13 Set the operating environment of IWS (Internal Web Server) function. Using IWS function enables to transfer a print data conversion application to the machine and use the print data conversion function and other functions. | ||||||||
IWS Settings | ON, OFF | |||||||
Port Number (Web Server) | 1 to 65535 (8090) | |||||||
Port Number (Application Installation) | 1 to 65535 (8091) | |||||||
Connect IWS Apps to Network | Allow, Restrict | |||||||
Remote Panel Settings Select whether to permit the customer engineer to perform remote panel operation. Enabling this setting displays the [Remote Panel Operation] button on the [Utility Menu]. For details, contact your service representative. | ||||||||
Client Settings | ON, OFF | |||||||
Port No. | 1 to 65535 (443) | |||||||
Connection Timeout | 20 to 300 (60) (sec.) | |||||||
Server Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Certificate Verification Level Settings Select verification items to verify the certificate when establishing an SSL communication. | ||||||||
Expiration Date | Confirm, Do Not Confirm | |||||||
Key Usage | Confirm, Do Not Confirm | |||||||
Chain | Confirm, Do Not Confirm | |||||||
Expiration Date Confirmation | Confirm, Do Not Confirm | |||||||
CN (Common Name) | Confirm, Do Not Confirm | |||||||
Synchronize WebDAV Client Setting When accessing the server in which the dedicated software is installed via a proxy server, register the proxy server you are using. | Individual Settings | |||||||
Proxy Server Address | Host Name Input Up to 253 one-byte characters can be used. *9 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | |||||||
Proxy Server Port Number | 1-65535 (8080) | |||||||
User Name | Up to 63 one-byte characters can be used. | |||||||
Password | Up to 63 one-byte characters can be used. | |||||||
Launch Remote Panel from CSRC Select whether to permit the customer engineer to start the remote panel from the remote diagnosis system. Enabling this setting displays the [Remote Panel Operation] button on the [Utility Menu]. For details, contact your service representative. | Allow, Restrict | |||||||
JSP Setting Configure an environment of usage for the a JAVA-based communication application software like Color Centro, Job Centro. | ||||||||
JSP Setting | ON, OFF | |||||||
SSL Setting | Non-SSL Only, SSL Only, SSL/Non-SSL*15 | |||||||
Authentication Setting | Enable, Invalid | |||||||
Login Name | Unknown Up to 8 one-byte characters can be used. | |||||||
Password | change it Up to 8 one-byte characters can be used. | |||||||
Port Number | 30081-30090 (30081) | |||||||
Port Number (SSL) *15 | 30081 to 30090 (30082) | |||||||
Hot Folder Setting Set the operating environment of Hot Folder in order to print PDF and TIFF files directly. | ||||||||
Hot Folder Setting | ||||||||
Hot Folder Function | Enable, Invalid | |||||||
Authentication | Synchronize, Do Not Synchronize | |||||||
Print Order | File Copy Start Order, File Copy Completion Order | |||||||
User Setting | 001 to 100 | |||||||
User Name | The User Name can be specified using up to 20 one-byte or two-byte characters. | |||||||
Password | Up to 20 one-byte characters can be used. | |||||||
Delete All Printed Files | Yes, No |
*1: | If [Auto Input] is selected, the following settings are available. - DHCP Setting - BOOTP Setting - ARP/PING Setting - AUTO IP Setting However, changing the selection from [Auto Input] to [Direct Setting] invalidates the settings made for "DHCP Setting" and "BOOTP Setting." Also, changing from [Manual Input] to [Auto Input] validates the following settings. - DHCP Setting - BOOTP Setting - ARP/PING Setting - AUTO IP Setting |
*2: | If "IPv6 Settings" is set to [OFF], this function is disabled even when "IPv6 Auto Setting" is set to [ON]. In PageScope Web Connection, the drop-down list of ''IPv6 Auto Setting'' is grayed out. |
*3: | Selecting [OFF] for "IPv6 Auto Setting" enables the setting change of "Global Address," "Prefix Length," and "Gateway Address." |
*4: | If the following address range is specified, it causes an error. fe80:: - febf:ffff:ffff:ffff:ffff:ffff:ffff:ffff ff00:: - ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff |
*5: | This can be set if [Encryption Algorithm] is set to [AES-CBS]. |
*6: | This can be set if [Encryption Algorithm] is set to [SHA-2]. |
*7: | Available only for the range from fe80: 0: 0: 0: : to fe80: 0: 0: 0: ffff: ffff: ffff: ffff. |
*8: | If you use the Scan to SMB in Mac OS X 10.7 or later, set the [SMB Authentication Method] to [NTLMv1/v2]. |
*9: | Up to 253 one-byte characters including periods can be entered for the host name. To enter 64 characters or more, you need to use periods (.) to separate the characters. |
*10: | You can use the advanced settings in the Administrator Mode of PageScope Web Connection. For details, refer to Overview of PageScope Web Connection. |
*11: | Only one IP address, not a range, can be permitted/denied in three ways. For example, to permit/deny 192.168.11.22 only, enter: 192.168.11.22 - 0.0.0.0 0.0.0.0 - 192.168.11.22 192.168.11.22 - 192.168.11.22 |
*12: | "Discovery User Name" cannot be specified with the same entry as that for "Read User Name" or "Write User Name." |
*13: | To use the IWS function, a service setting is required. For details, contact your service representative. |
*14: | To display [SSL Only] and [SSL/Non-SSL] in SSL Setting, configure the following setting from PageScope Web Connection.
|
*15: | To display [SSL Only] and [SSL/Non-SSL] in SSL Setting, configure the following setting from PageScope Web Connection.
|