RGB-CMYK DLP: Import to the Image Controller

You can register an RGB-CMYK device link profile that is saved in [Local], [My Documents], or [Network] to the image controller.

1. Click [RGB-CMYK Device Link Profile] on [Profile Management] screen.

   • You can also click the [File] menu - [Profile Type] - [RGB-CMYK Device Link Profile].

2. Select the places from [Local], [My Documents] or [Network] of the tree format, where the RGB-CMYK Device Link Profile are saved.

   The list appears according to the selection.

3. Select an RGB-CMYK device link profile from the list.

4. Click [Import].

   The [Import] screen is displayed.

   • When you select the multiple RGB-CMYK device link profiles, [Import] is not available.

   • When a folder other than [Controller] is selected on the tree view, [Import] is not available.

   • Similar operation can be done when you select [File] menu - [Import].

5. Enter [Saved Name] and [Memo].
   Up to 31 one-byte characters can be entered to [Saved Name]. Up to 64 one-byte characters (32 two-byte characters) can be entered to [Memo].

   • You cannot save the RGB-CMYK device link profile of the same name with those in the image controller.

6. Click [Import].

   The RGB-CMYK device link profile is registered in the image controller.

   [Import] screen is closed to return to [Profile Management] screen.