Home ApplicationOpenAPI Setting

OpenAPI Setting

Click [OpenAPI Setting] on the menu of [Network] tab to display this screen.

This screen allows you to make a setting on the extended application I/F (OpenAPI).

  1. Enter a desired port number into the [Port Number] text box.

  2. Select either [Non-SSL Only], [SSL Only], or [SSL/Non-SSL] from the [Use SSL/TLS] drop-down list. (This item is not displayed when the device certificate is not installed.)

  3. Set the port number to be used for SSL communication in [Port Number (SSL)]. (This item is not displayed when the device certificate is not installed.)

  4. Enter [Proxy Server Address]. To enter the host name, select the [Please check to enter host name.] check box.

  5. Enter [Proxy Server Port Number].

  6. Enter [User Name].

  7. Enter [Password]. If a password has already been set, [Password is currently set] is displayed. To change the password, select the [Password is changed.] checkbox, and enter a new password.

  8. If you want to verify certificates for communication via SSL, specify whether to confirm the items to be verified.

    [Client Certificates]: Selects whether to request clients that are connecting with the machine for a certificate.

    [Validity Period]: Checks whether the certificate's validity period is still valid.

    [CN]: Checks whether the Common Name (CN) of the certificate is identical to the address of the server.

    [Key Usage]: Checks whether the certificate is used according to the intended usage approved by the issuer of the certificate

    [Chain]: Checks whether or not the certificate chain (certificate pass) has a problem. The chain is verified by referring to the external certificates managed by the machine.

    [Expiration Date Confirmation]: Checks whether or not the certificate has expired.

  9. Click [OK]. Clicking [Cancel] cancels the setting.

  10. Click [OK] on the setting complete screen.

  • [Use SSL/TLS] can be set only when [Admin.Mode] or [Admin.Mode and User Mode] is selected in [Mode Using SSL/TLS] under [PKI Settings] - [SSL Setting] in the [Security] tab.

Specified Application Start Setting

You can start only the pre-specified OpenAPI application when this machine is started.

  1. Click [OpenAPI Setting], then [Specified Application Start Setting] in the menu of the [Network] tab.

  2. Click [Enable], select the desired application from [Default Startup Application Selection], and click [OK].

    If the desired application is not registered, [Do Not Start] is displayed.

Single Sign-On Setting

Refer authentication information from the enhanced server when the OpenAPI application starts. Using this function, you can configure the environment to establish the single sign-on with the OpenAPI application to be started and the back-end system associated with the OpenAPI application.

To perform [Single Sign-On Setting]: Click [OpenAPI Settings], then [Single Sign-On Setting] in the menu of the [Network] tab.