Home ApplicationTCP/IP Setting

TCP/IP Setting

Click [TCP/IP Setting] - [TCP/IP Setting] on the menu of [Network] tab to display this screen.

This screen allows you to configure settings to connect to a TCP/IP environment and use it.

  1. To use TCP/IP, select [ON] from the [TCP/IP] drop-down list.

  2. Specify [Network Speed] as necessary. The default setting is [Auto (10M/100M/1Gbps)].

  3. To assign an IPv4 IP address, specify the assignment method of IP address from [IP Address Setting Method] in IPv4

  4. If you have selected [Direct Setting] for [IP Address Setting Method], enter [IP Address], [Subnet Mask], and [Default Gateway].

  5. If you have selected [Auto Input] for [IP Address Setting Method], the IP address is automatically assigned by DHCP or another method. Also select the Auto Input method.

  6. To use IPv6, select [ON] from the IPv6 drop-down list.

  7. To assign an IPv6 global address, select [ON] from the [IPv6 Auto Setting] drop-down list.

  8. To assign an IPv6 global address using DHCPv6, select [ON] from the [DHCPv6 Auto Setting] drop-down list.

  9. If you have selected [OFF] for [IPv6 Auto Setting], enter [Global Address], [Global Address Prefix Length], and [IPv6 Gateway Address].

  10. Change port numbers from [Raw Port Number] if necessary. If there is any port number that is not used, clear the checkbox of the port number.

  11. If a DNS server is used in the TCP/IP environment, and you want to use the host name to connect the machine to the environment, enter [DNS Host Name].

  12. To enable the dynamic DNS function, select [Enable] from [Dynamic DNS Setting]. Similarly, to use Link-Local Multicast Name Resolution (LLMNR), select Enable from the [LLMNR Setting] drop-down list.

  13. To obtain a domain name automatically in an environment where DHCP or another similar method is used, select [Enable] from [DNS Domain Auto Obtain]. Likewise, to obtain a search domain name automatically, select Enable from the [DNS Search Domain Name Auto Retrieval] drop-down list.

  14. If you do not want to obtain the domain name automatically, enter [DNS Default Domain Name].

  15. If you do not want to obtain the search domain name automatically, enter [DNS Search Domain]. Up to 251 one-byte characters can be used.

  16. If you want to use host names for name resolution when accessing computers and servers on the network from the machine, configure [DNS Server Settings (IPv4)] and [DNS Server Settings (IPv6)] for IPv4 and IPv6 respectively.

  17. To obtain the address of the DNS server automatically, select [Enable] from the [DNS Server Auto Setting] drop-down list, and enter the address of the DNS server used.

  18. To enable Service Location Protocol (SLP), select [Enable] from the [SLP Setting] drop-down list.

  19. To enable Line Printer Daemon (LPD), select [Enable] from the [LPD Setting] drop-down list. To use LPR printing, it must be set to [Enable].

  20. Click [OK] on the setting complete screen.

  21. If you have changed any setting with an asterisk (*), turn the machine power off then on.

  22. If you have changed the IP address or IP Address Setting Method, the following screen is displayed.

  23. Access the new IP address.