User's Guide

    Home > Descriptions of Functions / Utility Keys > [Utility] - [IC Card Auth.]

    [Utility] - [IC Card Auth.]

    [IC Card Auth.]

    To display: [Utility] - [IC Card Auth.]

    When using the optional IC Card Authentication Unit, set IC card authentication operations.

    Setting

    Description

    [IC Card Type]

    Select whether to permit a use for each IC card type.

    • Specify the authentication destination in [Authentication Assignment Dest.]. You can select the authentication server group or MFP, which is specified in [LDAP-IC Card Authentication Setting], as the authentication destination. In addition, you can specify up to three authentication destinations to search for their user information in parallel.
      Specify [Authentication Assignment Dest.] when [ON (External Server)] or [ON (MFP + External Server)] is selected in [Authentication Method] - [User Authentication] while the IC card type is set to FeliCa, TypeA, MIFARE(PID), or NFC(HCE).

    • When using [SSFC], you can register detailed information such as the company identification code or company code.

    • When using [FCF], you can register the section code.

    • When using [FCF (Campus)], you can register the campus identification code.

    • When using [MIFARE(PID)], register detailed information such as the key code.

    [Operation Settings]

    Select how to log in to this machine (default: [Card Authentication]).

    • [Card Authentication]: Logs in simply by placing your IC card on the authentication unit.

    • [Card Authentication + Password]: Logs in by placing the IC card on the authentication unit and entering the password.

    • [IC Card Auth. + PIN Code Auth.]: Logs in by placing the IC card on the authentication unit and entering the PIN code. This setting is available when VLAN is set.

    [Auth. Card ID Number]

    Select whether to notify the counter information, which collects the operation conditions of this machine, of the authentication card ID (default: [Ignore]).

    Tips
    • If the authentication method of user authentication is [ON (MFP + External Server)], the following restrictions apply.
      For authentication by IC card, use an external server. You cannot use the IC card to perform authentication with the MFP, so you need to enter the user name and password for authentication purposes.
      With [IC Card Type], you can assign the MFP as one of the authentication destinations for IC card authentication. However, when performing authentication with the MFP, you need to enter the user name and password for authentication purposes.
    • For details on IC Card Authentication Unit, contact your service representative.

    Bookmarks

    If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

    Filter by title

    Filter by title

    You can narrow the search range from the menu for this user's guide.
    Multiple choices are possible.