This section describes the machine settings.
[TCP/IP Settings]: Specify the IP address on this machine.
[JSP Setting]: Select [ON] in [JSP Setting], then select [Invalid] in [Authentication Setting].
Default port number: 30081 or 30082
Ordinarily, you do not need to change this number.
JSP: JavaServer Pages
[SNMP Settings]: Set both [SNMP Setting] and [SNMP v1/v2c(IP)] to [ON].
SSL and TLS: To use SSL or TLS, execute the following steps. To connect to Job Centro, select the port number and [SSL/TLS] in Job Centro.
Registration of device certificate
Setting of [Use SSL/TLS] and [Port Number (SSL/TLS)]
For details about the [TCP/IP Setting], [JSP Setting], and [SNMP Setting] of the image controller, refer to NIC Setting: Setting the Machine Network Information, TCP/IP Setting, JSP Setting, and SNMP Setting.