Sending to an Unregistered SMB Server
Procedure
1
Perform Step 1 through Step 2 from Sending to a Registered SMB Server.
2
Press [Input Address].
You can select destinations by pressing the register name from the destination list. For details about selecting a registered destination, refer to Sending to a Registered SMB Server.
3
Enter destination information. To display the text entry screen, press each item.
[Register Name]: Enter the destination name. The registered name is displayed in the destination list. Up to 24 single-byte characters (12 double-byte characters) can be entered.
[Reference Name]: The same name as the register name is entered automatically. The text used to search for the destination. If you want to change it, up to 24 single-byte characters (12 double-byte characters) can be entered.
[Host Address]: Enter the address of the SMB server. Up to 253 single-byte characters can be entered.
[File Path]: Enter the file path of the SMB server. Up to 255 single-byte characters (127 double-byte characters) can be entered.
[Login Name]: Enter the account name of the SMB server. Up to 32 single-byte characters (16 double-byte characters) can be entered.
[Password]: Enter the password for an SMB server. Up to 32 single-byte characters can be entered. The entered password is shown by "*".
For details about how to enter characters, refer to Entering Text.
4
Press [Register] to register the destination you entered.
You can register up to 150 SMB destinations. For details about registering a destination, refer to [Scan Address Register].
5
Press [Scan Settings].
The [Scan Settings] screen is displayed.
6
Perform the steps on Sending to a Registered SMB Server from Step 5.
in the upper-right of a page, it turns into 
and is registered as a bookmark.