HomeSearch by PurposeRestricting the Secondary Copy of Copied Paper

Search by Purpose

Restricting the Secondary Copy of Copied Paper

To print a concealed security watermark that appears when copied ([Copy Protect])

To display:
  • [Classic Style]
    • [Copy]
      • [Application]
        • [Copy Security]
          • [Copy Protect]

A text such as "Copy" or "Private" is printed as a concealed text.

Setting

Description

[ON]/[OFF]

Select [ON] to set Copy Protect.

[Copy Protect Type]

Select a stamp used. The date and time can also be printed.

  • [Preset Stamp]: Select a preset stamp to be printed.

  • [Registered Stamp]: Select a registered stamp to be printed.

  • [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper.

  • [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.

[Stamp Selection]

The registration status of the stamp is displayed.

[Detail Setting]

Select the density, size, and pattern overwriting of print characters if necessary.

[Copy Protect]

Select how to print the copy protect pattern. Also, you can set the pattern contrast if necessary.

[Background Pattern]

Select a background pattern.

[Change/Delete Position]

Allows to check, change or delete the stamp position settings if necessary. You can change the stamp sequence and insert a space between stamps. When you select up to four stamps, you can change their angle (45 degrees).

To print stamps such as "Copy" and "Private" on the entire page ([Stamp Repeat])

To display:
  • [Classic Style]
    • [Copy]
      • [Application]
        • [Stamp/Composition]
          • [Stamp Repeat]

Print a stamp such as "Copy" or "Private" on the entire page.

Setting

Description

[ON]/[OFF]

Select [ON] to set Stamp Repeat.

[Stamp Repeat Type]

Select a stamp used. The date and time can also be printed.

  • [Preset Stamp]: Select a preset stamp to be printed.

  • [Registered Stamp]: Select a registered stamp to be printed.

  • [Date/Time]: Select a format (type) of date and time to be printed. The date/time when the original was scanned is stamped on the paper.

  • [Other]: Specify the job number, the machine's serial number, and distribution control number to be printed.

[Stamp Selection]

The registration status of the stamp is displayed.

[Detail Setting]

Select the density, size, and pattern overwriting of print characters if necessary.

[Change/Delete Position]

Allows to check, change or delete the stamp position settings if necessary. You can change the stamp sequence and insert a space between stamps. When you select up to four stamps, you can change their angle (45 degrees).

  • You can print multiple stamps, such as registered stamp, preset stamp, date/time, job number, and serial number, at a time. However, the number of stamps that can be printed may be limited depending on the type and angle of the selected stamps.