Overview of the Job Edit
You can edit the print setting of a job when selecting the job from the Hold Job list and then selecting Hold Job - Job Edit from the Job Operations menu.
You can also select the job and choose the command from the right-click menu, click the Job Edit icon, or drag the job to the Job Edit icon.
Note that if you select multiple jobs, the Job Edit screen is not displayed.
You can edit print jobs that are set to PS, PDF, PDF (APPE), TIFF, JPEG, or PPML as the PDL type displayed in the job list, but you cannot do other types of print jobs, print jobs from the PPD driver, or copy jobs.
However, by changing the setting of No. 28 in Utility/Counter - Administrator Setting - Controller - Software Switch Setting on the machine, you can also edit a PPD job. Furthermore, a store job over 10,000 pages may not be operated depending on the HDD free space.
Tips
For the job that uses the half or more of the HDD capacity, if editing the print setting that requires re-RIP, you cannot store or print the job.
For the job that uses the half or less of the HDD capacity, you may not store and print the job depending on the remaining space of the HDD. In that case, delete unnecessary jobs and then re-execute the operation.
If a job that is edited with the touch panel of the main body is edited with Job Centro, the settings that were configured with the touch panel of the main body are discarded. The settings that had been configured with Job Centro before editing on the main body's touch panel are also discarded.
You can edit the print setting of the selected job.