User's Guide
- Home
- Menu
× Menu Useful Software If you have a problem…
- FAQ
- Troubleshooting
HOMEPaper and OriginalsLoading PaperLoading Banner Paper in Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740mRemoving the output extension tray (Finisher FS-531 or Finisher FS-612)
Menu
Paper and Originals
- Overview of Paper and Original
- About Paper and Original
- Paper and Original Indications
- List of Associated Equipment
- Paper Types
- Paper Weight Available for Use
- Paper Capacity Available for Use
- Paper Size Available for Use
- Storing Paper
- Print Speed
- Correcting Unevenness and Improving Feedability (Outputting with Fixing Unit and Adjusting Conveyance Performance)
- Loading Paper
- Checking the Remaining Amount of Paper
- Loading Paper
- Paper Management
- Loading paper into the Main Body Tray
- Loading paper into Multi Bypass Tray MB-506
- Loading paper into Multi Bypass Tray MB-508
- Loading paper into Paper Feeder Unit PF-602m
- Fine-adjusting the gap between side guide plates of Paper Feeder Unit PF-602m
- Loading paper into Paper Feed Unit PF-707m
- Fine-adjusting the gap between side guide plates of Paper Feed Unit PF-707m
- Loading paper into Large Capacity Unit LU-202m
- Loading paper into Large Capacity Unit LU-202XL or Large Capacity Unit LU-202XLm
- Loading Paper in Post Inserter of Folding Unit FD-503
- Loading Paper in Post Inserter PI-502
- Loading Tab Paper
- About Loading Tab Paper
- Loading tab paper into Main Body Tray.
- Loading tab paper into Multi Bypass Tray MB-506
- Loading tab paper into Multi Bypass Tray MB-508
- Loading tab paper into Paper Feeder Unit PF-602m
- Loading tab paper into Paper Feed Unit PF-707m
- Loading tap paper into Large Capacity Unit LU-202m
- Loading tab paper into Large Capacity Unit LU-202XL or Large Capacity Unit LU-202XLm
- Loading Small-Size Paper
- Loading banner paper into Large Capacity Unit LU-202XL or Large Capacity Unit LU-202XLm
- Loading Banner Paper in Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m
- Mounting Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m
- Mounting the feeding extension tray (Multi Bypass Tray MB-506)
- Mounting the feeding extension tray (Multi Bypass Tray MB-508)
- Mounting the output extension tray (Output Tray OT-511)
- Mounting the output extension tray (Relay Unit RU-518)
- Mounting the output extension tray (Finisher FS-531 or Finisher FS-612)
- Mounting Output Extension Tray (Finisher FS-532 / Output Tray OT-510)
- Loading banner paper into the feeding extension tray
- Removing the feeding extension tray (Multi Bypass Tray MB-506)
- Removing the feeding extension tray (Multi Bypass Tray MB-508)
- Removing the output extension tray (Output Tray OT-511)
- Removing the output extension tray (Relay Unit RU-518)
- Removing the output extension tray (Finisher FS-531 or Finisher FS-612)
- Removing Output Extension Tray (Finisher FS-532 / Output Tray OT-510)
- Loading Cover Paper for Perfect Binding
- Paper Setting
- Positioning the Original
Removing the output extension tray (Finisher FS-531 or Finisher FS-612)
In order to remove the mounted Banner Tray Unit MK-740 (output extension tray), perform the reverse procedure to mounting it. For details about the mounting procedure, refer to Mounting the output extension tray (Finisher FS-531 or Finisher FS-612).